Fosi Audio Q4 - Mini Gaming Stereo DAC & Headphone Amplifier

Fosi Audio Q4 - Mini Gaming Stereo DAC & Headphone Amplifier - Image 2

out of stock

Fosi Audio Q4 – Mini Gaming Stereo DAC & Headphone Amplifier

Brand

CategoryAMPs & DACs

Easy to set up, no special software, app, or driver to install, a true plug-and-play digital audio adapter.
With USB, optical and coaxial SPDIF inputs can fit with most home audio system, and RCA output can be connected to amplifier or powered speakers on your desktop; Built-in Hi-Fi headphone amp chip can drive most 16ohm to 200ohm headphones.
160mW RMS(32 ohms, 20 Hz – 20 KHz, 0.01% THD), with bass and treble control can be used as preamp or volume controller for your PC/MAC/Computer.
Mini Compact D/A converter, stream bit-perfect 24bit/192KHz HD with low jitter, with output protect circuit, safe for your expensive audio system.

Out of stock

32.000 د.ك

Overview

Frequently Asked Questions:

Q1. How do I power the DAC-Q4?

A: You will need to use the supplied Micro-USB cable to power it, I recommend using the PC-USB port/5V to power it. Note: The Micro-USB cable cannot be fully inserted into the device power port, please do not force it. Subsequent revisions have been made.

Q2. Why no Audio Output on the back of the device?

A: The Audio Output is disconnected when headphones are connected. Solution: Disconnect the headphone.

Q3. Why do I get endless white noise?

A: Please check that your input device is using Dolby/DTS audio, please switch off Dolby/DTS audio and try again.

Q4. No Dolby/DTS audio and I still get noise through the USB input?

A: 1. Please switch the USB port to USB 3.0 or back USB port and try again, as some USB ports have unstable data transmission;

2. Please try again with another computer;

3. Please replace the PC-USB cable and retest, contact me for compensation if the original cable is faulty;

4. Please change the power supply adaptation and retest, why? because of the ageing of the power supply there may be an abnormal power supply resulting in white noise. I recommend using the PC-USB port/5V to power it.

Q5. USB Device not recognized on Windows?

A: ● Select Start, then type device manager in the Search box, and then select Device Manager. ● Expand Universal Serial Bus controllers. Press and hold (or right-click) a device and select Uninstall. Repeat for each device. ● Once complete, restart your computer. Your USB controllers will automatically install.

If Windows update causes the device to be unrecognised, please update all windows components and reboot, retest. Please contact me for a solution.

Get the listening enjoyment!

What will you get?

1x Fosi Audio DAC-Q4
1x 5V USB Power Supply Cable
1x PC-USB Cable
1x Optical Cable
1x User’s Manual
18x Months After Sales
Nx Ming's Customer Support

Product description:

PC-USB supports input sampling rate: 96K/24Bit

High and low sound adjustment range: ±6dB

Fiber/coaxial support input sampling rate: 192K/24Bit

Frequency response: 20Hz-20kHz (±3dB)

PC-USB support operating system: XP/W7/W8/W10/MAC/linux

Distortion: 0.01%; SNR: ≥105dB

Amp output maximum power: 100mW 32Ω load

Headphone matching impedance: 16-200Ω

Working voltage: DC5V; RCA output level: 2.3V

Size (L*W*H): 73.5*98*33MM (without knobs and terminals)

Q6. How to do plug and play on Windows?

A: 1. Just click the sound icon in your notification area.

2. Click the “Select playback device” option.

3. Select the playback device "Digital HiFi Audio".

Q7. I can't play Spotify music in Plug and Play mode?

A: Please exit the Spotify app and switch the playback device to the computer's own sound card device, open Spotify and play, confirm that it works and then switch the playback device to DAC-Q4 "Digital HiFi Audio".

Q8. How do I get the highest 24Bit/96kHz resolution on my PC?

A: Right-click the PC sound icon in the lower right corner, open Volume Mixer, click on the icon of the device/SPDIF: “Digital HiFi Audio” to open the Properties, click the Advanced, select 24Bit, 96000Hz for maximum sound quality output.

Q9. Why do I get an intermittent sound?

A: 1. Please switch the USB port to USB 3.0 or back USB port and try again, as some USB ports have unstable data transmission;

2. Please replace the PC-USB cable and retest, contact me for compensation if the original cable is faulty.

This is Ming, Ask Me: www.amazon.co.uk/askseller?sellerID=A27MPXN0R8YFPE#. Or leave any of your instant messaging accounts and I'll contact you.

Supports Bass, Treble and Volume Adjustment Good Anti-Interference Function Makes the Sound Pure and Clear, and There are Professional Headphone Amplifier Chip 97220+NE5532 and Multi-Knob Sound Adjustment, Allowing You to Drive Headphone/RCA Directly and Adjust the Treble Bass Aluminum Metal Housing Comes with an Aluminum Metal Shell Which Makes it Durable, Heat-resisted and High Quality, and It can Easily Install and Operate DAC Converter It Converts USB, Coaxial or Optical Digital Audio Signals to Analog L/R Audio and Connects to an External Device Such as an Amplifier via 3.5mm Headphone Cable. Note: No support for Dolby and DTS Great Compatibility It is Lightweight and Compact, Perfectly Working with Any Playback Source with an USB, Optical or Coaxial Digital Audio Output Such as Digital and HD Televisions, Satellite Receivers, CD/DVD/Blu-Ray Players and PS4 Xbox Consoles