out of stock

Thermal Grizzly NVMe M.2 SSD Cooler Heatsink

Brand

CategoryUSB Storage & Memory

PASSIVE M.2 COOLER – Preventing NVMe drive slowdown during intensive use
INSTALLATION – Takes up to 5 minutes and is simple with no risk of damaging the m.2 drive or motherboard
ARCHITECTURE – Modern cooling design, consists of a front cover and back plate, as well as two matching Minus Pad 8 high-performance thermal pads
COMPATIBILITY – With single-sided M.2 NVMe SSDs that are 22 millimeters wide and 80 millimeters long
CONGRUENCE – Ideally designed for desktop computers, perfectly matched with drives from manufacturers – Samsung, Kingston, ADATA

Out of stock

11.900 د.ك

Overview

Thermal Grizzly

The Thermal Grizzly M.2 SSD Cooler is a passive cooling solution for next generation form factor SSDs. It's no secret that modern M.2 NVMe SSDs, in particular, get hot when in demanding use, so the speed of the drive has to be slowed down. To counteract this problem and get full performance, the Grizzly professionals have developed a compact passive cooler that significantly reduces the temperatures of an M.2 SSD.

Thermal Grizzly M.2 SSD Cooler

Ideal heat dissipation solution for the NGFF SSDs. Forget about overheated storage and reduced transfers. Compatible with drives of the many manufacturers such as Samsung, Kingston, ADATA.
Installation is simple. Just screw the cooler to the drive! You can be sure that the heat sink is firmly attached. It is more reliable and less problematic than mounting clips or rubber bands, as in the case of competing solutions.
Elegant design consists of black, aluminum heatsink, will match well with every motherboard.

At a Glance:

Black Passive Cooler for M.2 SSDs.
Lower temperatures to reduce speed limitations.
Compatible with one-sided M.2 NVMe SSDs (2280).
Easy installation.

M.2 SSD Cooler; Thermal Grizzly; Front and Back Covers;

The sophisticated design of the cooler consists of a front cover and a backplate as well as two matching Minus Pad 8 high performance thermal pads. Note that the Thermal Grizzly M.2 SSD Cooler is only compatible with one-sided, 22-millimeter-long M.2 NVMe SSDs that are 80 millimeters long, and that M.2 (NGFF) connectors with a height of 4.2 millimeters must be used.