Addlink X70 M.2 2280 Gen3x4 NVMe RGB Internal SSD With Heatsink – 2TB

Addlink X70 M.2 2280 Gen3x4 NVMe RGB Internal SSD With Heatsink - 2TB

X70 GEN3X4 NVMe addgame X70 is addlink’s gaming series SSD. The X70 is covered by a slim and a eye-catching heatsink which reduces the SSD’s temperatures  for excellent cooling. With 3D NAND, a DRAM Cache Buffer and LDPC ECC technologies, it maintains extremely high speeds and data integrity during even the most intense gaming, redering, overclocking, and other high demand applications. Lightening speed with 3D NAND addlink's X70 M.2 PCIe follows NVMe and utilizes the PCIe Gen3 x 4 interface, meaning four lanes are used for transmitting and receiving data simultaneously, resulting in compelling performance of Read/Write up to 3500/3000MB/s*.and random Read/Write 510K/500K IOPS. Metal heatsink with superior cooling addlink X70 consists of a PCB, and metal with diamond-cut heatsink. Combined, heatsink can drop typical temps effectively compared to bare M.2 SSDs, with some scenarios seeing even larger heat reduction. RGB lighting effect Don't need extra cables or special mounting strategies X70 has built-in water flowing lighting with RAINBOW mixed color effect*. The colorful lighting change can be presented at once. Then you are able to enjoy the fun of RAINBOW lighting effect immediately and possess the unique RGB high speed M.2 solid state drive. For ease of use, the X70 is compatible with most motherboards from all the major brands. Better endurance, aim at high-end applications Experience the unprecedented performance for heavy workloads and engineering applications with the highly reliable X70 SSD, available in high capacity up to 2TB with high endurance up to 1600TBW. The X70 boasts a cutting-edge 3D NAND-based architecture that delivers the next-generation performance in a compact M.2 form factor. Includes SSD ToolBox Software addlink M.2 PCIe SSD Toolbox is a software offer an easy way to analyze and manage your drive. With addlink M.2 SSD Toolbox you will be able to:  

• View drive information exp: general SPEC, firmware version

• Scan and diagnostic drive Health

• Check drive identify device command

• Monitor SMART Status

• Run secure erase

 

​Specifications

 

• Capacity : 2TB

• NAND Flash : 3D TLC

• DRAM Cache : DDR3L / DDR4L(High Capacity)

• Dimensions : 80(L)x20(W)x9.1(H) mm, 20g

• Interface : NVMe GEN3x4 1.3

• Form Factor : M.2 2280

• Seq. Read/Write (MB/s) :  3500/3000＊

• 4K Random Read/Write (IOPS) : 550K/680K

• Operating Temp. : 0°C ~ 70°C

• Storage Temp. : -40°C ~ 85°C

• Power Consumption(R/W) : 5.1W/6.1W

• MTBF : 1.8 Million Hours

• TBW :  3100TBW

• Support Functions : TRIMM DEVSLP, Garbage Collection, ECC, S.M.A.R.T, SLC Caching, Wear Leveling, Bad Block management, Over-Provision, RAID Protection

• Operating System : Microsoft Windows 7 (additional driver required) Microsoft Windows 8 (additional driver required) Microsoft Windows 10, Linux Kernel 2.6.31 or later

• Note : Please make sure that your computer has a M.2 slot.