out of stock

RODE NT2-A Large-Diaphragm Multipattern Studio Condenser Microphone

Name: RODE NT2-A Large-Diaphragm Multipattern Studio Condenser Microphone
Brand: RODE
SKU: 698813000395
Availability: OutOfStock

Brand

RODE

CategoryMicrophones

Key Features

Multi-pattern large-diaphragm studio condenser microphone
Three-position pad, high-pass filter and polar pattern controls
Ultra-low self-noise and full frequency response
Internal capsule shock mounting
For Vocals and Instruments
Cardioid, Omni & Figure-8 Polar Patterns
Pad Switch at -5 or -10 dB
High-Pass Filter at 40 or 80 Hz
Shockmount Inhibits Vibration Noise
Large 1″ Gold-Sputtered Diaphragm
Transformerless Output Stage
Pop Filter Controls Vocal Plosives
XLR Cable for Hookup to Mic Preamp
Operates on 24 or 48 VDC Phantom Power
Includes RØDE SM6 shock mount, pop filter and dust cover
Designed and manufactured in Australia

Out of stock

119.950 د.ك

Overview

The NT2-A is a highly versatile large-diaphragm studio condenser microphone designed to offer pristine audio quality and flexibility in equal measure. Featuring a three-position pad (0dB, -5dB, -10dB), high-pass filter (flat, 40Hz, 80Hz), and polar pattern control (cardioid, omnidirectional, figure-8), it can easily adapt to any recording situation in the studio.

The NT2-A features a dual 1-inch gold-sputtered cardioid condenser capsule with internal shock mounting and offers ultra-low self-noise and a full frequency response, evoking the silky smooth character of the legendary microphones of the '50s and '60s.

Combining a true condenser capsule, three selectable polar patterns, and ultralow-noise circuitry, the Rode NT2-A large-diaphragm studio microphone offers a clear and smooth sonic signature along with versatile pickup responses, making it ideal for all sorts of voice and instrument sources at home or in the studio. Plus, its bundle of accessories—shockmount, pop filter, XLR cable, and dust cover—help the NT2-A serve vocalists, rappers, and voice-over artists especially well.

With low noise being a top priority of the NT2-A, its 1" gold-sputtered capsule is internally shock-mounted to further isolate it from handling and vibration noise. Enhancing its professional character are the onboard pad (-5 or -10 dB) and high-pass filter (40 or 80 Hz) settings, which help avoid distortion and bass builup. Since it can run on 24 or 48 VDC phantom power, the NT2-A can be used with a variety of professional and entry-level XLR mic preamps.

Large-Diaphragm True Condenser

This true condenser (externally biased) features a 1" gold-sputtered diaphragm that provides a broad frequency response, wide dynamic range, and excellent signal-to-noise ratio.

Three Polar Patterns

With three polar patterns selectable on the mic, the NT2-A offers excellent versatility for single-source close miking (cardioid recommended), dual-source pickup (figure-8 recommended), and room ambience capture (omnidirectional recommended).

Special Voicing

The frequency and transient response of this transducer has been voiced to complement today's recording techniques, and yet still evoke the silky smooth character of the legendary microphones of the '50s and '60s.

Transformerless Output

The transformerless JFET output electronics result in an ultralow-noise output (just 7 dBA) while maintaining maximum signal gain.

48V Phantom Power

The NT2-A operates reliably on 24 or 48 VDC phantom power, which can be supplied via most XLR-connected mic preamps, mixer channels, or audio interfaces.

Accessory Package

The accessory package includes a studio-grade shockmount with an integrated pop filter, a premium 20' XLR mic cable, a dust cover, and a downloadable instructional video packed with recording tips.

Features at a Glance

True condenser (externally biased)
Large 1" HF1 capsule with gold-sputtered diaphragm
Cardioid, figure-8, and omnidirectional polar patterns
Self-noise of only 7 dBA
Transformerless JFET active circuitry
Wide dynamic range
XLR 3-pin output connector
Runs on phantom power
Internally shock-mounted capsule
Includes SM6 shockmount, pop filter, and dust cover

RODE NT2A Specs

Key Specs

Form Factor	Large Diaphragm Mic / Stand/Boom Mount
Capsule	Condenser
Polar Pattern	Cardioid, Figure-8, Omnidirectional
Frequency Range	20 Hz to 20 kHz
Maximum SPL	147 dB SPL (1 kHz, 1% THD, 1-Kilohm Load) 157 dB SPL (1 kHz, 1% THD, 1-Kilohm Load, with Pad)

Microphone

Form Factor	Large Diaphragm Mic / Stand/Boom Mount
Intended Sound Sources	Vocals, Speech/Voice Over, Instrument
Sound Field	Mono
Operating Principle	Pressure Gradient
Capsule	Condenser
Diaphragm	1" / 25.40 mm
Polar Pattern	Cardioid, Figure-8, Omnidirectional
Pattern Selection	Switched (Adjustable on Mic)

Performance

Frequency Range	20 Hz to 20 kHz
Maximum SPL	147 dB SPL (1 kHz, 1% THD, 1-Kilohm Load) 157 dB SPL (1 kHz, 1% THD, 1-Kilohm Load, with Pad)
Impedance	200 Ohms
Sensitivity	-36 dBV/Pa at 1 kHz
Output Level	16 mV (Max, 1 kHz)
Dynamic Range	140 dB
Signal-to-Noise Ratio	87 dB A-Weighted
Equivalent Noise Level	7 dB SPL A-Weighted

Power

Bus Power	None
Operating Voltage	24 V (Phantom Power) 48 V (Phantom Power)

Physical

Color	Silver
Mounting	Shockmount (Included)
Included Case	Mic Sock
Included Filters	Pop Filter
Dimensions	ø: 2.2 x L: 8.2" / ø: 55 x L: 209 mm
Weight	1.9 lb / 0.86 kg