Dual Connectivity

Digital Audio

Sampling Rate

Maximum SPL

One Microphone. Two Workflows.

Connect the PodMic USB to an audio interface, mixer or production console through its 3-pin XLR output for a traditional professional broadcast workflow.

Or connect directly over USB-C to a compatible computer, smartphone or tablet for digital recording without requiring a separate audio interface.

Broadcast-Quality Dynamic Capsule

A high-power neodymium dynamic capsule is tuned for rich, focused and highly detailed speech reproduction.

The cardioid polar pattern focuses pickup toward the front of the microphone while rejecting sound from the sides and rear, helping keep the voice prominent in podcasting, streaming and voice-over environments.

20Hz–20kHz

Wide specified frequency response for detailed voice capture across the audible frequency range.

148dB SPL

High maximum sound pressure handling gives the microphone substantial headroom for energetic speech and louder sources.

-57dB Sensitivity

Specified sensitivity of -57dB re 1V/Pa, equivalent to approximately 1.4mV at 94dB SPL.

24-Bit / 48kHz Digital Recording

When connected through USB-C, the PodMic USB operates as a direct digital recording microphone with 24-bit audio at a 48kHz sampling rate.

This makes it possible to build a streamlined podcast, streaming or voice-over setup using only the microphone and a compatible computer or mobile device.

Onboard APHEX DSP

The USB signal path includes powerful onboard APHEX digital signal processing for shaping and controlling the voice before it reaches your recording or streaming software.

Available processing includes a compressor, noise gate, high-pass filter, Aural Exciter and Big Bottom, while VoxLab provides simplified controls for quickly adjusting the overall sound.

Compressor

Helps control vocal dynamics for a more consistent recording or broadcast level.

Noise Gate

Reduces lower-level background sound when the microphone is not receiving the intended voice signal.

High-Pass Filter

Helps reduce unwanted low-frequency rumble and excessive sub-bass energy.

Aural Exciter & Big Bottom

APHEX processing can add additional presence, clarity and controlled low-frequency weight to the vocal signal.

Zero-Latency Headphone Monitoring

A built-in 3.5mm headphone output allows compatible headphones to connect directly to the microphone when using the digital USB workflow.

Zero-latency monitoring allows you to hear your voice in real time, while the integrated level control gives direct access to headphone volume.

Internal Pop Filter

An integrated pop filter helps reduce plosive air bursts produced by speech sounds such as P and B.

Internal Shock Mount

The internally suspended capsule helps reduce vibrations transmitted through the microphone body and mounting system.

External Pop Filter Included

RØDE includes an external studio-quality pop filter for an additional layer of plosive control.

Built for Modern Creators

The PodMic USB can move from a full XLR studio to a compact USB creator setup without changing microphones.

It is fully compatible with Windows and Mac computers as well as compatible iOS and Android smartphones and tablets, making it useful for desktop podcasting, mobile interviews and portable streaming setups.

Robust All-Metal Construction

The PodMic USB uses a rugged all-metal body designed for regular recording, broadcast and creator use.

An integrated swing mount makes it easy to position the microphone on a compatible desktop stand or boom arm while maintaining the classic broadcast microphone form.

Can the RØDE PodMic USB White connect through both USB and XLR?

Yes. The RØDE PodMic USB White provides both digital USB-C and analog 3-pin XLR connectivity, allowing it to connect directly to compatible computers and mobile devices or to an audio interface or mixer.

What type of microphone is the RØDE PodMic USB?

The RØDE PodMic USB is an end-address dynamic broadcast microphone with a cardioid polar pattern and high-power neodymium capsule.

What digital audio quality does the RØDE PodMic USB support?

The RØDE PodMic USB supports 24-bit digital audio at a 48kHz sampling rate through its USB-C connection.

Does the RØDE PodMic USB include onboard audio processing?

Yes. The USB signal path includes APHEX processing with a compressor, noise gate, high-pass filter, Aural Exciter and Big Bottom, plus VoxLab controls.

Does the RØDE PodMic USB have headphone monitoring?

Yes. It includes a 3.5mm headphone output with onboard volume control and zero-latency monitoring when using the digital USB workflow.

Can the RØDE PodMic USB work with phones and tablets?

Yes. The PodMic USB is compatible with supported iOS and Android smartphones and tablets in addition to Windows and Mac computers.

Does the RØDE PodMic USB include a pop filter?

Yes. It has an internal pop filter and internal shock mount, and RØDE also includes an external studio-quality pop filter in the box.

What warranty does the RØDE PodMic USB have?

RØDE lists a five-year manufacturer warranty for the PodMic USB.