Cooler Master HAF 700 ARGB Full Tower Case - Black

Supplied cooling

GPU length clearance

Side radiator option

Chassis format

The Case Design

The large steel frame and glass side panel provide room around the main hardware, with dimensions of 666 L × 291 W × 626 H mm including protrusions. A separate body-only measurement is 556 × 279 × 540 mm. Use the complete exterior dimensions when planning the case location and access around the tower.

Supplied Cooling and Lighting

Two 200 mm SickleFlow ARGB PWM fans are installed at the front, two 120 mm SickleFlow ARGB PWM fans at the rear and one 120 mm SickleFlow ARGB PWM fan at the bottom. The supplied A1 ARGB Gen2 controller and ARGB/PWM hub provide the supported device-control and connection arrangement.

Radiator and Fan Mounting

Radiator choices include up to a 480 mm unit at the side, 420 mm at the bottom and either two 360 mm radiators or one 420 mm radiator at the top. These arrangements depend on radiator thickness and surrounding assemblies. Use the supplied rotatable bracket and compatibility guidance when planning a custom cooling layout.

Component Clearance

The HAF 700 supports E-ATX and smaller listed board formats, with additional SSI-CEB and SSI-EEB support. GPU length clearance reaches 490 mm, CPU-cooler height clearance is 166 mm and PSU length clearance is 200 mm. Check the complete graphics cooler, power plugs and radiator positions before final component selection.

Access, Storage and Routing

Tool-free graphics-card clamping, a PSU mounting arrangement and a swivelling drive cage provide access during installation. Multifunction brackets can carry drives or compatible custom-loop parts, with nine combined drive positions documented. Rear routing clearance of 90–101 mm leaves dedicated room to organise power, signal and lighting leads.

Manufacturer model

H700-IGNN-S00

Exterior dimensions

666 L × 291 W × 626 H mm, including protrusions

Included fans

2 × 200 mm front; 2 × 120 mm rear; 1 × 120 mm bottom — all SickleFlow ARGB PWM

Which motherboard formats fit?

E-ATX / ATX / Micro-ATX / Mini-ITX.

Which fans are supplied?

2 × 200 mm front; 2 × 120 mm rear; 1 × 120 mm bottom — all SickleFlow ARGB PWM.

Which fan is supplied?

2 × 200 mm front; 2 × 120 mm rear; 1 × 120 mm bottom — all SickleFlow ARGB PWM.

What graphics-card length is supported?

490 mm.

What CPU-cooler height is supported?

166 mm.

Which top radiator sizes fit?

Up to 2 × 360 mm or 1 × 420 mm; follow compatibility guidance.

Which front connections are available?

4 × USB-A 3.2 Gen 1; USB-C; audio.