Corsair VENGEANCE 32GB (2x16GB) DDR5 6000MHz RAM Memory Kit - Black

Total supplied capacity

Rated profile data rate

Rated CAS latency

Supplied modules

Capacity and Module Arrangement

The 32 GB total is supplied as 2 matched 16 GB modules. Install the supplied modules together in the slots recommended by the motherboard manual, allowing the platform to use its supported channel arrangement. Consider the working-memory requirements of the applications you run alongside the space already installed in the computer. A matched kit provides its stated total across the supplied modules; it is not that capacity per stick.

A Rated 6000 MT/s Profile

The rated memory profile is up to 6000 MT/s, with CL30 CAS latency at 1.40 V. These values describe the tested profile rather than an automatic setting on every computer. Choose a processor and motherboard that support the intended memory configuration, then use the board’s documented profile controls to configure the system.

Profile Support and Startup Settings

Intel XMP is the supported profile format for this model. The default SPD/JEDEC configuration is DDR5-4800 CL40 at 1.1 V. The computer may start at its default memory settings before a profile is selected. The available operating speed depends on the processor’s memory controller, installed BIOS, module population and the exact kit support offered by the board.

A DDR5 Desktop DIMM Match

This is DDR5 desktop memory in the Desktop UDIMM format. Match both the memory generation and physical module type with the motherboard before installation. DDR4 and DDR5 use different electrical arrangements and cannot be interchanged. Check the board’s memory support list and maximum supported module capacity when selecting the kit for the complete platform.

Aluminium Heat Spreaders for a Compact Build

VENGEANCE DDR5 uses aluminium heat spreaders in a compact module design. This CMK kit provides a straightforward memory arrangement for a desktop where clearance around the DIMM slots matters. Check its fit beneath the CPU cooler or fan before installation, and leave the board’s intended airflow route clear. The supplied modules use the motherboard’s memory slots without a separate lighting connection.

Manufacturer part

CMK32GX5M2B6000C30

Product family

CORSAIR VENGEANCE

Memory generation

DDR5

How many modules are supplied?

2 × 16 GB. The total kit capacity is 32 GB.

Will it automatically run at the rated data rate?

The default configuration is DDR5-4800 CL40 at 1.1 V. Using the up-to 6000 MT/s profile requires compatible hardware and appropriate BIOS configuration.

Which profile format is supported?

Intel XMP.

What are the rated latency and voltage?

CL30 CAS latency at 1.40 V.

Can it fit a DDR4 motherboard?

No. This model requires DDR5 desktop DIMM support. Check the exact kit and module capacity against the motherboard’s compatibility guidance.