Corsair Vengeance RGB 96GB DDR5 Memory Kit, Black

Total supplied capacity

Rated profile data rate

Rated CAS latency

Supplied modules

Capacity and Module Arrangement

The 96 GB total is supplied as 2 matched 48 GB modules. Install the supplied modules together in the slots recommended by the motherboard manual, allowing the platform to use its supported channel arrangement. Consider the working-memory requirements of the applications you run alongside the space already installed in the computer. A matched kit provides its stated total across the supplied modules; it is not that capacity per stick.

A Rated 6400 MT/s Profile

The rated memory profile is up to 6400 MT/s, with CL32 CAS latency at 1.40 V. These values describe the tested profile rather than an automatic setting on every computer. Choose a processor and motherboard that support the intended memory configuration, then use the board’s documented profile controls to configure the system.

Profile Support and Startup Settings

Intel XMP is the supported profile format for this model. The default SPD/JEDEC configuration is DDR5-4800 CL40 at 1.1 V. The computer may start at its default memory settings before a profile is selected. The available operating speed depends on the processor’s memory controller, installed BIOS, module population and the exact kit support offered by the board.

A DDR5 Desktop DIMM Match

This is DDR5 desktop memory in the Desktop UDIMM format. Match both the memory generation and physical module type with the motherboard before installation. DDR4 and DDR5 use different electrical arrangements and cannot be interchanged. Check the board’s memory support list and maximum supported module capacity when selecting the kit for the complete platform.

Ten-Zone RGB and Aluminium Heat Spreaders

VENGEANCE RGB DDR5 uses a panoramic light bar with ten individually addressable RGB LEDs per module. Compatible CORSAIR iCUE software provides lighting effects and synchronisation with other supported equipment. Aluminium heat spreaders surround the memory hardware. Check space beneath an overhanging CPU-cooler fan and arrange the modules in the motherboard’s recommended DIMM slots for the intended kit configuration.

Manufacturer part

CMH96GX5M2B6400C32

Product family

CORSAIR VENGEANCE RGB

Memory generation

DDR5

How many modules are supplied?

2 × 48 GB. The total kit capacity is 96 GB.

Will it automatically run at the rated data rate?

The default configuration is DDR5-4800 CL40 at 1.1 V. Using the up-to 6400 MT/s profile requires compatible hardware and appropriate BIOS configuration.

Which profile format is supported?

Intel XMP.

What are the rated latency and voltage?

CL32 CAS latency at 1.40 V.

Can it fit a DDR4 motherboard?

No. This model requires DDR5 desktop DIMM support. Check the exact kit and module capacity against the motherboard’s compatibility guidance.