Audio-Technica ATH-M50x 45mm Closed-Back Studio Headphones
Audio-Technica ATH-M50x 45mm Closed-Back Studio Headphones. From recording sessions to everyday listening, the ATH-M50x gives you a wired, closed-back design with practical studio features. Its detachable cables and folding construction make moving between desk and studio straightforward.
or 4 payments of 15.750 KWD with
Pay with card & save
Overview
AUDIO-TECHNICA ATH-M50X 45MM CLOSED-BACK STUDIO HEADPHONES
Audio-Technica ATH-M50x
Audio-Technica ATH-M50x: From recording sessions to everyday listening, the ATH-M50x gives you a wired, closed-back design with practical studio features. Its detachable cables and folding construction make moving between desk and studio straightforward. Explore this model at AX Store in Kuwait.
Nominal impedance
Acoustic design
Driver system
Published frequency response

Keep the session in focus
Large-aperture drivers reproduce a wide frequency range, while over-ear cups help reduce surrounding sound. The closed-back construction is useful when monitoring near a live microphone.
Check a cue with one ear
The earcups swivel through 90 degrees for one-ear monitoring. Adjust their position during a session without disconnecting your headphones. Set the earcups into a comfortable position before bringing the volume to your usual listening level.
Choose the cable for the job
Switch between a short straight cable for the desk, a longer straight cable for extra reach and a coiled cable for studio movement. The locking headphone connection keeps the cable secure.
A wired setup that stays simple
No charging or wireless pairing is needed. Connect to a compatible headphone output, adjust the volume and start listening. Fold the headphones into the supplied pouch when the session is over.
The Driver System in This Model
The listed driver arrangement is 45 mm; neodymium magnet; CCAW voice coil. The manufacturer’s stated frequency response is 15–28,000 Hz. Listen with familiar speech, instruments and transient-rich recordings while keeping the playback source and listening level consistent. Driver size describes the construction; the full listening result also depends on fit and your audio chain.

Match the Source to the Actual Load
This configuration has a listed impedance of 38 ohms. Source output capability and headphone sensitivity both affect the available listening level. Choose an appropriate headphone output, start at a low setting and adjust around your recordings. A plug adapter changes the connector size; it does not add amplifier power.




Audio-Technica ATH-M50x Setup Choices
Compare open-back or closed-back design, fit and the headphone connection. Check the intended source output and listening requirements together; the impedance number alone does not choose the complete setup. Explore JDS LABS ATOM AMP 2 Headphone Amplifier, JDS LABS ATOM DAC 2 USB-C DAC, Gator Frameworks Clamp Mounted Headphone Hanger for Desk.
Frequently Asked Questions
Which headphone configuration is this?
Audio-Technica ATH-M50x 45mm Closed-Back Studio Headphones. 38 ohms is the listed impedance; choose the exact model rather than transferring specifications from another version.
Is the acoustic design suitable for my room?
The closed-back construction provides passive sound isolation and helps reduce playback spill. Place both earcups evenly to maintain the intended seal.
Do I need a headphone amplifier?
38 ohms is the impedance, but sensitivity, source capability and your desired level also matter. Use a suitable headphone output; higher-impedance models can need more voltage than a phone or controller provides.
What cable or plug is specified?
Detachable, locking. 3.5 mm stereo; 6.3 mm screw-on adapter. Use the connection and any adapter specified for this exact model.
Does it include a voice microphone?
These are dedicated listening headphones. Add a separate microphone and the appropriate recording input if your setup needs voice chat or recording.
How should I interpret the recommended audio equipment?
The recommendations offer alternative audio chains. A standalone amplifier needs a suitable analogue source; a standalone DAC needs an amplifier. Keep the normal stereo cable with the matching headphone output.
Which accessories are listed?
6.3 mm screw-on adapter and carrying pouch. Other equipment shown in listening or studio photographs is a separate purchase.
Build Your Setup with AX Store
Explore computers, displays and accessories for your workspace at AX Store. For help choosing the right model or checking an accessory, contact AX Store.
Compare Audio-Technica ATH-M50X 45mm Studio Monitor Headphones - White. Match the exact model, connection and configuration to your setup.
THE DETAILS
Technical specifications
Sound
Closed-back, over-ear dynamic
45 mm; neodymium magnet; CCAW voice coil
15–28,000 Hz
38 ohms
99 dB/mW
1,600 mW at 1 kHz
Build and connection
285 g, excluding cable and connector
90 degrees
Detachable, locking
3.5 mm stereo; 6.3 mm screw-on adapter
Neither included
In the box
1.2–3 m coiled; 3 m straight; 1.2 m straight
6.3 mm screw-on adapter and carrying pouch
Black
Product identification
AUDIO-TECHNICA
ATH-M50x
04961310125431
COMPLETE YOUR SETUP
