Audio-Technica ATH-M50X 45mm Studio Monitor Headphones - White

Nominal impedance

Acoustic design

Driver system

Published frequency response

Monitor with focus

Closed earcups help reduce surrounding sound, while large-aperture drivers with copper-clad aluminium voice coils reproduce detailed audio across a broad frequency range. Use familiar recordings and a consistent listening level when assessing sound with your usual audio equipment.

Work your way

Turn an earcup through 90 degrees for single-ear monitoring. The padded headband and circumaural cushions provide a familiar studio fit. Use familiar recordings and a consistent listening level when assessing sound with your usual audio equipment.

Choose the cable for the job

Switch between a 1.2 m straight cable, a 3 m straight cable and a 1.2–3 m coiled cable. A 6.3 mm adapter connects to compatible studio equipment.

Pack up easily

Fold the headset for storage and carry it in the supplied pouch. This is the wired white ATH-M50xWH model. Set the earcups into a comfortable position before bringing the volume to your usual listening level.

The Driver System in This Model

The listed driver arrangement is 45 mm dynamic; neodymium magnets and CCAW voice coils. The manufacturer’s stated frequency response is 15 Hz - 28,000 Hz. Listen with familiar speech, instruments and transient-rich recordings while keeping the playback source and listening level consistent. Driver size describes the construction; the full listening result also depends on fit and your audio chain.

Which headphone configuration is this?

Audio-Technica ATH-M50X 45mm Studio Monitor Headphones - White. 38 ohms is the listed impedance; choose the exact model rather than transferring specifications from another version.

Is the acoustic design suitable for my room?

The closed-back construction provides passive sound isolation and helps reduce playback spill. Place both earcups evenly to maintain the intended seal.

Do I need a headphone amplifier?

38 ohms is the impedance, but sensitivity, source capability and your desired level also matter. Use a suitable headphone output; higher-impedance models can need more voltage than a phone or controller provides.

What cable or plug is specified?

1.2 m straight, 3 m straight and 1.2-3 m coiled; detachable. 3.5 mm stereo. Use the connection and any adapter specified for this exact model.

Does it include a voice microphone?

These are dedicated listening headphones. Add a separate microphone and the appropriate recording input if your setup needs voice chat or recording.

How should I interpret the recommended audio equipment?

The recommendations offer alternative audio chains. A standalone amplifier needs a suitable analogue source; a standalone DAC needs an amplifier. Keep the normal stereo cable with the matching headphone output.