Loading...

FiiO New K3 Headphone Amplifier

  • [Up to 384kHz/32 bit PCM and native DSD256]: Equipped with an XMOS USB receiver chip, the new K3 headphone amps is capable of decoding up to 384kHz/32 bit PCM and native DSD256 – the same as many DACs costing much more. The new K3’s dual crystal oscillators ensure that any digital audio signals being fed into the DAC are exactly correct for further enhanced sound quality. Just connect the new K3 to your computer via USB to instantly upgrade to high-fidelity sound, and enjoy your music.
  • [Simply reliable USB power]: The new K3 headphone amplifier adopts the modern USB Type-C input interface for a more reliable and stable connection, including that of power. However, care to ensure an uncompromised power supply doesn’t stop there – the new K3 implements overvoltage protection (OVP) and a double-filter circuit to ensure power supply stability, while the digital and analog audio circuits each get their own power supply to greatly reduce crosstalk.
  • [Two modes for your choice]: Sometimes, you may not have access to a device that can connect to the new K3 via USB Audio Class 2, you can go to USB Audio Class 1 mode with just the flick of a switch. In high-performance applications, you can use the 2.0 mode to enjoy up to 384kHz/DSD 256 decoding. · For certain situations, you can use the 1.0 mode to enjoy up to 96kHz/24-bit PCM audio without needing any drivers. *Using the 2.0 mode requires downloading and installing the FiiO USB driver.
  • [Coaxial/Optical digital outs]: The XMOS USB receiver chip in the new K3 directly converts any USB audio input to digital signals output via the coaxial and optical connectors, allowing you to connect to speaker systems, amplifiers, or other external decoders.
  • [Different connection options for different scenarios]: 1. Connect it to a desktop computer 2. Use the driverless 1.0 mode for business trips 3. Make it a digital turntable connected to an external decoder 4. Connect it to a speaker, using the New K3 as a DAC

43.00 د.ك

Availability: In stock

Category:

Share

Brand

Loading...

FiiO New K3 Headphone Amplifier

  • [Up to 384kHz/32 bit PCM and native DSD256]: Equipped with an XMOS USB receiver chip, the new K3 headphone amps is capable of decoding up to 384kHz/32 bit PCM and native DSD256 – the same as many DACs costing much more. The new K3’s dual crystal oscillators ensure that any digital audio signals being fed into the DAC are exactly correct for further enhanced sound quality. Just connect the new K3 to your computer via USB to instantly upgrade to high-fidelity sound, and enjoy your music.
  • [Simply reliable USB power]: The new K3 headphone amplifier adopts the modern USB Type-C input interface for a more reliable and stable connection, including that of power. However, care to ensure an uncompromised power supply doesn’t stop there – the new K3 implements overvoltage protection (OVP) and a double-filter circuit to ensure power supply stability, while the digital and analog audio circuits each get their own power supply to greatly reduce crosstalk.
  • [Two modes for your choice]: Sometimes, you may not have access to a device that can connect to the new K3 via USB Audio Class 2, you can go to USB Audio Class 1 mode with just the flick of a switch. In high-performance applications, you can use the 2.0 mode to enjoy up to 384kHz/DSD 256 decoding. · For certain situations, you can use the 1.0 mode to enjoy up to 96kHz/24-bit PCM audio without needing any drivers. *Using the 2.0 mode requires downloading and installing the FiiO USB driver.
  • [Coaxial/Optical digital outs]: The XMOS USB receiver chip in the new K3 directly converts any USB audio input to digital signals output via the coaxial and optical connectors, allowing you to connect to speaker systems, amplifiers, or other external decoders.
  • [Different connection options for different scenarios]: 1. Connect it to a desktop computer 2. Use the driverless 1.0 mode for business trips 3. Make it a digital turntable connected to an external decoder 4. Connect it to a speaker, using the New K3 as a DAC

43.00 د.ك

Availability: In stock

Availability: In stock

Category:

Share

Category:

Share

Brand

GET IN THE KNOW

Product description

GET IN THE KNOW

Product description

NEW K3

NEW K3

NEW K3

Dual headphone jacks

Being optimized for indoor desktop use, the new K3 is equipped with both 3.5mm single-ended and 2.5mm balanced headphone jacks. Both outputs have audio jack detection, which means that when headphones are inserted into the balanced out, balanced boost automatically kicks in resulting in about a 50% output power increase compared to the single-ended out.

Line out

The 3.5mm line out is driven directly by the OPA1612 op-amp, to ensure as little sound quality reduction as possible. The line out output is also adjustable with maximum power output up to 2Vrms, to ensure compatibility with a wide variety of active speakers and external amplifiers.

PS: When using the line out, please disconnect any headphones

Reliable USB Type-C input interface

The new K3 adopts the modern USB Type-C input interface for a more reliable and stable connection, including that of power. However, care to ensure an uncompromised power supply doesn’t stop there – the new K3 implements overvoltage protection (OVP) and a double-filter circuit to ensure power supply stability, while the digital and analog audio circuits each get their own power supply to greatly reduce crosstalk.

NEW K3

Coaxial and Optical digital outs

The XMOS USB receiver chip in the new K3 directly converts any USB audio input to digital signals output via the coaxial and optical connectors, allowing you to connect to speaker systems, amplifiers, or other external decoders.

* The volume knob does not control digital output volume. The New K3 headphone amps can output digital audio signals up to 192kHz and DSD64 over DoP. Please adjust the settings of the device you are connecting the NEW K3 to if the device does not support the digitally output format.

NEW K3

Different connection options for your choice

1. Connect it to a desktop computer when you at home or office.

2. Use the driverless 1.0 mode for your business trips.

3. Make it a digital turntable connected to an external decoder, you would love it.

4. Connect it to a speaker, using the New K3 amplifier as a DAC. You would know how HiFi it is.

NEW K3

NEW K3

 

Gain and bass switches

The switch for high and low gain ensures that you can use the new K3 with a wide variety of headphones, and that your listening volume needs are covered. The hardware bass boost switch enhances the dynamic range of the lower frequencies and gives them some extra punch to really make your songs, games, and movies come to life.

Two modes for many situations

Sometimes, you may not have access to a device that can connect to the new K3 via USB Audio Class 2. In these situations, you can go to USB Audio Class 1 mode with just the flick of a switch.

· In high-performance applications, you can use the 2.0 mode to enjoy up to 384kHz/DSD 256 decoding.

· For certain situations, you can use the 1.0 mode to enjoy up to 96kHz/24-bit PCM audio without needing any drivers.

*Using the 2.0 mode requires downloading and installing the FiiO USB driver

*After switching USB modes, you need to either turn the new K3 off and on, or unplug and plug in the USB cable.

EXPLORE MORE

Related products

EXPLORE

Related products

Refine your search

Price

2KWD2 749KWD
Product Categories
Show More
Brands
Show More
Color Filter
Show More
Screen Size
Show More
Product Screen Type
Show More
Refresh Rate
Show More
Number of Cores Filter
Show More
CPU Socket Type
Size
Show More
Speed
Show More