Klotz Greyhound XLR Microphone Cable, 3 Meter

Cable Length

Microphone-Side Connector

Destination Connector

Conductor Cross-Section

XLR at both ends

A 3-pin female connector links to the microphone, while the male connector connects to a suitable XLR input. Check the connected equipment and the complete working arrangement, matching the exact model’s stated features to the way you plan to use it.

Built for repeated setup

The copper conductors are protected by a PVC jacket. Short connector sleeves provide a comfortable grip when connecting and disconnecting equipment. Check the connected equipment and the complete working arrangement, matching the exact model’s stated features to the way you plan to use it.

Plan the Analogue Signal Route

This three-metre GREYHOUND lead uses female and male three-pin XLR connectors. Match the microphone, interface input and power setting; the cable carries the analogue signal and does not add an audio interface, microphone preamp or phantom supply.

A Lead with Room for Desk Movement

The three-metre length gives a microphone route across a typical desk or recording position. Leave relaxed loops near equipment that moves, securing excess cable without loading the connectors or trapping the lead under chair casters.

Copper Conductors and a Protective Shield

Two 0.22 mm² conductors use 99.95% ETP copper inside a six-millimetre cable. The spiral shield and PVC jacket support the balanced analogue connection while providing a flexible outer covering for repeated setup and routing.

What should I check for this exact model?

This three-metre GREYHOUND lead uses female and male three-pin XLR connectors. Match the microphone, interface input and power setting; the cable carries the analogue signal and does not add an audio interface, microphone preamp or phantom supply.

Does it turn the microphone into a USB device?

No. This is an analogue audio cable. Recording to a computer requires a suitable audio interface or other supported analogue input and the correct gain and power settings.

Can the connector shape confirm phantom-power support?

The XLR cable does not generate phantom power. A condenser microphone that needs 48 V must receive it from a suitable microphone input, with the microphone manufacturer’s connection and power instructions followed.

How much cable length is supplied?

The cable is three metres long. Plan the route with enough slack for equipment movement and avoid pulling the connectors or sharply bending the lead at the desk edge.