SADES
SADES Cobra Dual Monitor Arm - Up to 40 Inch / 12KG Per Arm
SADES Cobra Dual Monitor Arm supports two monitors up to 40 inches each, using 75 × 75 or 100 × 100 mm VESA patterns. The Up to 12 kg flat / 11 kg curved per monitor position load arrangement and adjustable joints support a planned desktop display layout.
Color
Regular price
20.000 KWD
or 4 payments of 5.000 KWD with
Pay with card & save
18.900 KWD
Save 1.100 KWD
Overview
SADES COBRA DUAL MONITOR ARM
SADES Cobra Dual Monitor Arm
SADES Cobra Dual Monitor Arm supports two monitors up to 40 inches each, using 75 × 75 or 100 × 100 mm VESA patterns. The Up to 12 kg flat / 11 kg curved per monitor position load arrangement and adjustable joints support a planned desktop display layout. Available from AX Store in Kuwait.
2
Monitor positions
40 inch
Maximum per screen
75 / 100 mm
VESA patterns
12 kg flat
Maximum per supported position
Plan the Number of Displays
SADES Cobra Dual Monitor Arm supports two monitors, with a maximum 40-inch screen class for each supported position. Select the monitor count around the actual desk and working arrangement. The product is mounting hardware, with screens chosen separately; the arm count does not mean that monitors are included in the package.
Check Each Monitor’s Load
The listed load arrangement is Up to 12 kg flat / 11 kg curved per monitor position. Measure the actual monitor weight with its original stand removed and compare it with the appropriate arm limit. Cobra gives different maximum loads for flat and curved screens, so apply the rating that matches the display. Include the mounting hardware and any accessory load specified by the installation instructions.
Match the VESA Connection
The supported VESA patterns are seventy-five by seventy-five millimetres and one hundred by one hundred millimetres. Compare the monitor’s rear mounting pattern, recess and screw requirements with the supplied mounting parts. A matching screen size alone does not confirm compatibility, and a mount should not be attached through an unsuitable adapter or unsupported rear housing.
Position the Screens within the Joint Ranges
The tilt range is +80° / -45°, with ninety-degree left/right screen swivel and one-hundred-and-eighty-degree rotation in either direction. These ranges describe the joints rather than guaranteed clearance around every monitor. Check the neighbouring screen, wall and desk when planning the final height, angle and portrait or landscape position.
A Defined Mechanical Arm Design
The gas-spring arrangement supports repositioning within the arm’s documented movement range. Cobra uses aluminium, steel and plastic with a transparent side detail showing the spring mechanism. Move the display through its intended path after installation and keep the cable route clear of the joints.
Model
SADES Cobra Dual Monitor Arm
Monitor positions
2
Maximum screen class
40 inch per monitor
Install on a Suitable Desk
Desk clamp for 10–80 mm desk thickness; grommet mount for 10–40 mm thickness. Confirm the desk material, thickness and mounting edge or hole before installation. Integrated cable management helps organise the connected leads; leave enough slack for the arm’s full intended movement. Secure the hardware using the supplied instructions and adjust spring tension with the actual monitor installed.
Match the Display, Arm and Desk
Check the monitor weight without its stand, VESA pattern and the arm’s minimum and maximum load. Match the desk clamp or grommet arrangement and allow clearance for movement and cables. Compare related options such as SADES Viper SA-MS01 Dual Monitor Arm - 32-inch / 9kg Per Arm or SADES Apep SA-MA02 RGB Single Monitor Arm - Aluminum / Gas Spring - White, keeping the exact model and configuration in the decision. For the wider setup, explore SADES SD-Seal 22" FHD Gaming Monitor - 144Hz / 1ms / HDMI 2.1 and check the connection, size or mounting requirements before pairing accessories. Browse the SADES range at AX for more choices.
SADES Cobra Dual Monitor Arm Setup Choices
Check the monitor weight without its stand, VESA pattern and the arm’s minimum and maximum load. Match the desk clamp or grommet arrangement and allow clearance for movement and cables. Explore SADES Reef Manta-27 27-inch QHD 240Hz Fast IPS Gaming Monitor, SADES Reef Manta-32 32" QHD Gaming Monitor - 180Hz / 0.3ms / Fast IPS.
Frequently Asked Questions
Are screens included?
No. The product is the monitor-arm hardware.
Which VESA patterns fit?
75 × 75 mm and 100 × 100 mm; check the actual monitor recess and screw requirements.
What monitor load is supported?
Up to 12 kg flat / 11 kg curved per monitor position.
Which desk thickness is supported?
Desk clamp for 10–80 mm desk thickness; grommet mount for 10–40 mm thickness.
Does screen size alone establish compatibility?
No. Check screen size, stand-removed weight, VESA interface and the complete desk installation.
Build Your Setup with AX Store
Explore computers, displays and accessories for your workspace at AX Store. For help choosing the right model or checking an accessory, contact AX Store.
THE DETAILS
Technical specifications
Compatibility and Movement
SADES Cobra Dual Monitor Arm
2
40 inch per monitor
Up to 12 kg flat / 11 kg curved per monitor position
75 × 75 mm; 100 × 100 mm
+80° / -45°
+90° / -90°
+180° / -180°
Desk clamp for 10–80 mm desk thickness; grommet mount for 10–40 mm thickness
Integrated
Screens selected separately
Aluminium; steel; plastic
COMPLETE YOUR SETUP
Pairs well with
