Syncwire Aux Cable 3.5mm, 1M
Syncwire 3.5 mm AUX Stereo Cable — 1 m connects two compatible 3.5 mm analogue audio sockets with male stereo plugs at both ends. Its 1 m length provides a direct link from a suitable source output to headphones or an analogue speaker input.
or 4 payments of 1.500 KWD with
Pay with card & save
Overview
SYNCWIRE 3.5 MM AUX STEREO CABLE — 1 M

Syncwire 3.5 mm AUX Stereo Cable — 1 m
Syncwire 3.5 mm AUX Stereo Cable — 1 m connects two compatible 3.5 mm analogue audio sockets with male stereo plugs at both ends. Its 1 m length provides a direct link from a suitable source output to headphones or an analogue speaker input. Explore this model at AX Store in Kuwait.
Plug size
Cable length
Listening channels
Connector arrangement
Stereo 3.5 mm Plugs at Both Ends
This cable uses male 3.5 mm stereo plugs at both ends. Connect a suitable audio output to a matching analogue input, keeping the source and receiving-device roles clear. The arrangement suits equipment that actually has those sockets, rather than a device that provides audio only through USB-C or Lightning.
A Direct Analogue Audio Path
The lead carries analogue stereo audio between connected equipment. It does not contain a USB audio interface, Bluetooth receiver or digital audio converter. Choose this cable when the source already provides an analogue listening or line output and the receiving equipment accepts an appropriate 3.5 mm signal.
A 1 m Connection Around the Desk
The 1 m lead gives a defined route between nearby devices. Measure the path around the monitor, computer or speaker position and allow some slack at both plugs. Keep the cable clear of chair wheels, sharp edges and moving furniture, avoiding tension on a small headphone or AUX socket.
Stereo Listening Rather Than a Headset Splitter
The connection is for left and right stereo listening channels. It does not provide the separate microphone wiring of a four-contact headset cable or split one headset into independent headphone and microphone plugs. Match the equipment’s listening connection and use the correct accessory when a microphone path is also required.
Construction and Handling
Syncwire specifies a nylon-braided jacket, shielded construction and gold-plated connector contacts for this AUX cable family. Grip the connector housing when removing a plug and leave space for any protective device case so the connector can seat fully in the socket.
Model
Syncwire 3.5 mm AUX Stereo Cable — 1 m
Cable length
1 m
Connector arrangement
3.5 mm TRS male to male
Set the Source and Listening Level
Begin at a moderate volume, seat both plugs securely and select the receiving device’s AUX or analogue input. Start playback on the source and adjust the connected controls to a comfortable level. If no audio is heard, check the selected input and whether another output remains active in the source’s settings.
Match Both Ends of the Signal Route
Choose the connectors, signal type and cable length for the equipment at both ends. A passive lead does not add an audio interface, power supply or a different signal protocol; confirm the input function before ordering. Compare related options such as Monoprice Onyx 3.5mm TRRS AUX Cable, 3M Length or Klotz GRG1FP03.0 Microphone Cable, XLR to Jack, 3M, keeping the exact model and configuration in the decision. For the wider setup, explore Shure SM58-LCE Cardioid Dynamic Vocal Microphone, XLR and check the connection, size or mounting requirements before pairing accessories.
Syncwire 3.5 mm AUX Stereo Cable — 1 m Setup Choices
Choose the connectors, signal type and cable length for the equipment at both ends. A passive lead does not add an audio interface, power supply or a different signal protocol; confirm the input function before ordering. Explore Logitech Z407 Bluetooth Speakers with Subwoofer.
Frequently Asked Questions
What sockets are required?
Compatible 3.5 mm analogue audio sockets.
Does it carry headset microphone wiring?
No separate four-contact headset microphone path is specified.
Does it convert a USB-C signal?
No. It is a passive analogue lead.
How long is the cable?
1 m.
Does a phone need an audio output?
Yes. It needs a suitable analogue socket or a separate compatible audio adapter.
Build Your Setup with AX Store
Explore computers, displays and accessories for your workspace at AX Store. For help choosing the right model or checking an accessory, contact AX Store.
THE DETAILS
Technical specifications
Product Specifications
Syncwire 3.5 mm AUX Stereo Cable — 1 m
1 m
3.5 mm TRS male to male
Analogue stereo audio
Left and right listening channels
Passive audio cable
Compatible analogue source output to analogue input
No separate headset microphone wiring
Nylon braided
Gold-plated
COMPLETE YOUR SETUP
Pairs well with