Monoprice
Monoprice Onyx 3.5mm TRRS AUX Cable, 3M Length
Monoprice Onyx 18634 TRRS Audio Cable provides a 10 ft / 3.048 m analogue audio and compatible microphone connection with 3.5 mm four-contact TRRS male to male connectors. Its four-contact arrangement can carry compatible headset audio and microphone signals when the pin assignments match both connected devices.
Overview
MONOPRICE ONYX 18634 TRRS AUDIO CABLE
Monoprice Onyx 18634 TRRS Audio Cable
Monoprice Onyx 18634 TRRS Audio Cable provides a 10 ft / 3.048 m analogue audio and compatible microphone connection with 3.5 mm four-contact TRRS male to male connectors. Its four-contact arrangement can carry compatible headset audio and microphone signals when the pin assignments match both connected devices. Available from AX Store in Kuwait.
3 m class
Cable length
3.5 mm TRRS
Connector arrangement
4 contacts
Construction
Audio + microphone
Signal arrangement
The Connector Arrangement
The cable uses 3.5 mm four-contact TRRS male to male connectors. TRRS provides four electrical contacts, including an additional contact compared with a three-contact stereo TRS plug. The connected equipment must use compatible signal and ground assignments for its audio and microphone functions.
A 10 ft / 3.048 m Cable Route
The documented length is 10 ft / 3.048 m. The ten-foot format is approximately three metres in common retail listings, with an exact conversion of 3.048 metres. Plan the route between the actual equipment positions and allow a little free movement at the connectors rather than leaving the cable pulled tight.
Compatible Microphone Signals
The TRRS lead is intended for compatible audio and microphone connections, but four-contact pin assignments can differ between devices. Check the source and headset wiring before relying on microphone operation. The cable does not separate one combined headset connection into a computer’s two individual microphone and headphone sockets.
A Passive Analogue Link
The Onyx cable provides a direct analogue connection between suitable ports. It requires no USB driver or digital pairing step. The source and receiving device must already provide compatible analogue signals; this lead does not create a microphone preamplifier, digital-to-analogue converter or powered audio output.
Connectors and Handling
Fit the 3.5 mm plugs fully into the matching sockets so all four contacts can connect as intended. Check that a device case or recessed socket does not obstruct insertion. Handle the connector body when disconnecting and leave enough room for the lead at the plug entry.
Model
Monoprice Onyx 18634 TRRS Audio Cable
Manufacturer model
18634
Length
10 ft / 3.048 m
Choose the Rest of the Audio Path
Match the cable to the source output, receiving input and intended audio level. Check any amplifier, powered speaker or headset requirements separately; this cable only provides the stated analogue connector link. The equipment’s own input selection and operating controls complete the setup.
Match Both Ends of the Signal Route
Choose the connectors, signal type and cable length for the equipment at both ends. A passive lead does not add an audio interface, power supply or a different signal protocol; confirm the input function before ordering. Compare related options such as Stagg XLR to XLR Microphone Cable, 3m or BESIGN Ground Loop Noise Isolator with 3.5mm Audio Cable, keeping the exact model and configuration in the decision. For the wider setup, explore Shure SM7dB Dynamic Vocal Microphone with Built-in Preamp and check the connection, size or mounting requirements before pairing accessories. Browse the Monoprice range at AX for more choices.
Monoprice Onyx 18634 TRRS Audio Cable Setup Choices
Choose the connectors, signal type and cable length for the equipment at both ends. A passive lead does not add an audio interface, power supply or a different signal protocol; confirm the input function before ordering.
Frequently Asked Questions
What connectors are fitted?
3.5 mm four-contact TRRS male to male.
What is the documented length?
10 ft / 3.048 m.
Does the cable include a USB audio interface?
No. It is a passive analogue cable.
What should be checked before connecting?
The source output and receiving input, signal type and any device-specific pin assignments.
Is it a speaker-power cable?
No. It is intended for the stated analogue audio interconnect arrangement.
Build Your Setup with AX Store
Explore computers, displays and accessories for your workspace at AX Store. For help choosing the right model or checking an accessory, contact AX Store.
THE DETAILS
Technical specifications
Product Specifications
Monoprice Onyx 18634 TRRS Audio Cable
18634
10 ft / 3.048 m
3.5 mm four-contact TRRS male to male
Analogue audio and compatible microphone connection
Passive analogue interconnect
4 per plug; match connected-device pin assignments
COMPLETE YOUR SETUP
Pairs well with
