Skip to content
COMPARISON Audio

DT 770 PRO vs DT 770 PRO X vs DT 700 PRO X

Compare beyerdynamic closed-back headphones: DT 770 PRO, DT 770 PRO X and DT 700 PRO X. Check cables, impedance, monitoring and source matching.

AA
Ali Aljaber
Updated 14 November 2026 6 min read
Beyerdynamic DT 770 PRO X Closed-Back Studio Headphones With Stellar.45 Driver for Recording & Monitoring

Quick answer

The DT 770 PRO, DT 770 PRO X and DT 700 PRO X are closed-back headphones, but their differences go beyond the model number. The classic DT 770 PRO uses a fixed cable and is sold in different impedances. The DT 770 PRO X and DT 700 PRO X use 48 ohm STELLAR.45 drivers and detachable cables, with different physical and tuning choices.

For a gaming desk, recording session or creator setup in Kuwait, first decide how much isolation you need and where the headphones will connect. Then compare the exact version, cable arrangement and sound preference. None of these models includes a microphone.

Exact versions compared

Model Impedance Cable arrangement Important distinction
DT 770 PRO 80 ohm 80 ohm Fixed straight cable Classic DT 770 PRO
DT 770 PRO 250 ohm 250 ohm Fixed coiled cable Check source voltage/headroom
DT 770 PRO X 48 ohm Detachable 3 m mini-XLR cable STELLAR.45 in the DT 770 design
DT 700 PRO X 48 ohm Detachable 1.8 m and 3 m cables Different enclosure and more linear tuning direction
beyerdynamic DT 770 PRO X closed-back headphones
beyerdynamic DT 770 PRO X Closed-Back Studio Headphones 48 Ohm

Why choose closed-back for monitoring?

A closed earcup reduces the direct exchange of sound with the room compared with an open-back design. This can help when you need to hear a voice recording without allowing as much playback to reach the microphone. It can also be useful in a shared room where open headphones would disturb someone beside you.

Closed-back does not mean silent to everyone else, and these are passive headphones rather than active noise-cancelling models. The seal depends on fit, glasses, hair and pad condition. Keep monitoring at a sensible level and position the microphone properly rather than relying on the earcup to solve every leakage problem. Our open-back versus closed-back guide explains the wider trade-off.

Classic DT 770 PRO: choose the version carefully

The 80 ohm and 250 ohm versions share the classic family name but have different electrical requirements and cable styles. The 80 ohm model linked here has a straight fixed cable, while the 250 ohm model uses a coiled fixed cable. Check which one will be more comfortable between your chair and the headphone output.

Do not choose 250 ohm simply because the number is larger. The available output voltage, headphone sensitivity and desired listening level determine whether the source has enough headroom. For more detail on these two classic versions, use our DT 770 PRO 80 versus 250 ohm comparison.

DT 770 PRO X: detachable cable in a familiar family

The DT 770 PRO X uses STELLAR.45 drivers rated at 48 ohm, with a removable cable at the earcup. For daily use, being able to unplug and replace the external cable is a practical difference from the classic model. The headband design also includes a relief area intended to improve comfort at the top of the head.

The 48 ohm rating supports broad source compatibility, but it does not make the headphone output of every phone, controller or interface identical. If the source is noisy or lacks clean headroom, an appropriate DAC/amp may still be useful. Start with the source you own, then compare a replacement only when it addresses a real requirement.

DT 700 PRO X: different tuning and cable options

The DT 700 PRO X also uses the STELLAR.45 platform, but it is a separate headphone with its own housing and tuning. beyerdynamic describes the DT 770 PRO X as more pronounced in bass and treble, and the DT 700 PRO X as more linear. That is a useful manufacturer distinction, not a guarantee that one preference suits every listener or recording task.

The DT 700 PRO X includes 1.8 m and 3 m detachable cables, whereas the DT 770 PRO X includes a 3 m cable. A shorter cable can be more convenient when the interface sits immediately beside the keyboard. Consider the full wearing experience, including clamp, heat and pad contact, rather than choosing from driver or weight specifications alone.

beyerdynamic DT 700 PRO X closed-back studio headphones
beyerdynamic DT 700 Pro X Studio Headphones

Pair the headphone with the actual signal path

For a USB desktop listening system, compare the FiiO K11, K11 R2R and K7. If you are recording a microphone, monitoring from the interface or mixer can be preferable to adding a separate route that makes you hear a delayed software return.

The AX Studio Pro Bundle pairs DT 770 PRO X with SM7dB, RØDECaster Duo, a boom arm and XLR cable. The closed-back headphone is part of the monitoring plan, not an included microphone itself. Read the AX bundle guide to see the exact components of each package.

These supplied headphone connections are single-ended. A mini-XLR earcup connector or a larger jack adapter does not automatically provide a balanced headphone signal. Our balanced headphone cable guide explains why the wiring, headphone design and output must all match.

Make the choice by your recording environment

Start with classic DT 770 PRO if its established design, fixed cable and selected impedance fit your existing setup. Choose DT 770 PRO X when you want the newer driver platform and detachable cable within the 770 family. Compare DT 700 PRO X when its tuning direction, body design and two cable lengths are more relevant. For a quiet private listening room where isolation is less important, also consider our DT 990 PRO versus PRO X comparison.

Frequently asked questions

Is DT 770 PRO X the same as DT 700 PRO X?

No. They share the STELLAR.45 driver family and 48 ohm rating, but differ in design, tuning and supplied cables.

Which ones have fixed cables?

The classic DT 770 PRO 80 and 250 ohm versions linked here. Both PRO X models in this guide have detachable cables.

Do these headphones have active noise cancellation?

No. Their closed construction provides passive isolation; they are not ANC headphones.

Can I connect them directly to a microphone for monitoring?

Only if the microphone or recording device has a suitable headphone output. A microphone input and a headphone output are different connections.

Manufacturer references

Product configurations checked against AX Store listings on 14 November 2026. Use the linked product pages for current prices, stock, selected colours and included accessories.

Explore the current Headphones selection at AX Store Kuwait.

AA

WRITTEN BY

Ali Aljaber

All guides from this desk

Choose the right equipment for your setup

Explore the exact models, current configurations and availability at AX Store Kuwait.

Added to cart

View cart

Subscribed

We'll email you as soon as it's back in stock.

Saved to wishlist

View wishlist