Electro-Voice RE20 BLACK Dynamic Broadcast Microphone

Passive Microphone

Pickup Pattern

Proximity-Effect Control

Microphone Output

Work naturally around the microphone

Variable-D minimizes proximity effect, reducing the extra bass that often appears when you move close to a directional microphone. Match the actual signal connection and the intended recording or listening setup, then check the relevant device controls before starting the session.

Control breath and handling noise

An internal pop filter helps with close vocal work, while internal element shock mounting reduces vibration transmitted to the capsule. Match the actual signal connection and the intended recording or listening setup, then check the relevant device controls before starting the session.

Shape the low frequencies

The bass tone switch gives you a practical way to reduce low-frequency emphasis for the voice or instrument you are recording. Match the actual signal connection and the intended recording or listening setup, then check the relevant device controls before starting the session.

A durable studio tool

The steel housing and humbucking coil help resist induced hum. This black version has the same acoustic and electrical design as the classic RE20, with a low-reflection charcoal finish.

Keep the Exact Model and Signal Path Clear

RE20 is a passive XLR dynamic microphone with no power requirement. Use an appropriate microphone preamp and the supplied 81715 stand clamp, matching any additional shock mount or arm to its actual dimensions and combined load.

Which signal path and version should I plan for?

RE20 is a passive XLR dynamic microphone with no power requirement. Use an appropriate microphone preamp and the supplied 81715 stand clamp, matching any additional shock mount or arm to its actual dimensions and combined load.

What listening connection is provided?

Headphone monitoring is provided by your separate audio interface or mixer, rather than assuming a headphone jack on this XLR microphone.

How should I choose a microphone arm?

Match the mounting thread, microphone and mount weight, desk fit and clearance. Include any shock mount in the total load, rather than choosing an arm from the microphone weight alone.

How should I set recording level?

Set the supported microphone or interface gain for normal speech or the intended source, leaving headroom for louder moments. Place the microphone for the stated pickup pattern and check the actual recording input before starting.