Kingston
Kingston FURY Beast RGB 32GB DDR5-6400 CL32 RAM - White
Kingston FURY Beast RGB 32GB kit with two 16GB DDR5 modules, 6400 MT/s CL32 timings, white heat spreaders and customizable RGB. Supports AMD EXPO v1.1 and Intel XMP 3.0 profiles for compatible desktop systems.
Regular price
228.000 KWD
or 4 payments of 57.000 KWD with
Pay with card & save
217.000 KWD
Save 11.000 KWD
Overview
KINGSTON FURY BEAST RGB 32GB DDR5 MEMORY
32GB DDR5 for a bright white build.
Kingston FURY Beast RGB pairs a white finish with 32GB of DDR5 memory in two 16GB modules. The kit is tested at 6400 MT/s with CL32-39-39 timings and includes both AMD EXPO and Intel XMP profiles. Adjustable RGB lighting and a 42.23 mm module height help you plan the look and clearance of your desktop.
32 GB
2 × 16 GB Kit
6400 MT/s
Tested Profile
CL32
Tested CAS Latency
42.23 mm
Module Height
Kingston FURY Beast RGB with two performance profiles
Choose the memory profile that suits your supported platform. The primary EXPO and XMP settings provide 6400 MT/s at CL32-39-39 and 1.4 V; a second profile offers 6000 MT/s at CL30-36-36 and the same voltage. These are stored presets you enable in your motherboard firmware. Before installation, check your board's memory support list, BIOS requirements and recommended two-DIMM slots. Actual achievable speed depends on the processor, motherboard and configuration.
A matched 2 × 16GB kit
The two 16GB modules provide 32GB of total capacity. Install them together in the slots recommended by your motherboard manual to use its dual-channel memory layout. Each module uses a single-rank 1Rx8 organization.
RGB control
Set the lighting through Kingston FURY CTRL or supported motherboard software. Infrared Sync coordinates effects between the modules. The light bars sit above aluminum heat spreaders and a black PCB, keeping the memory visible in a windowed desktop.
Check the physical fit
Each full-size 288-pin DDR5 module measures 133.35 mm long, 42.23 mm high and 7.11 mm thick with its heat spreader. Check the motherboard's memory support and CPU cooler clearance before installation; DDR4 and laptop SO-DIMM slots cannot accept this kit.
In the box
Two 16GB Kingston FURY Beast RGB DDR5 memory modules, with white heat spreaders.
Complete Your PC Setup
Check the motherboard's exact memory-kit support before building. Pair it with the ASUS ROG Strix Z890-A Gaming WiFi motherboard and the Kingston FURY Renegade G5 1TB SSD, browse more DDR5 RAM in Kuwait, or see the full Kingston range at AX Store.
Frequently Asked Questions
Is Kingston FURY Beast RGB 32GB DDR5-6400 one module or two?
This kit contains two 16GB modules for 32GB total. Its manufacturer part number is KF564C32BWEAK2-32, and both modules have white RGB heat spreaders.
Will it run at 6400 MT/s immediately after installation?
The default JEDEC profile is 4800 MT/s at CL40-39-39 and 1.1 V. The 6400 MT/s profile must be enabled in a compatible motherboard's BIOS; CPU, BIOS and memory support determine whether it can run at that setting.
Does this kit support both AMD EXPO and Intel XMP?
Yes. It includes AMD EXPO v1.1 and Intel XMP 3.0 profiles, with 6400 MT/s CL32 and 6000 MT/s CL30 options at 1.4 V. Check your motherboard's supported memory list for the exact kit.
Can this DDR5 kit fit a DDR4 motherboard or laptop?
No. It uses full-size 288-pin DDR5 unbuffered DIMMs for desktop DDR5 slots. DDR4 slots and laptop SO-DIMM slots are physically different.
Build Your Setup with AX Store Kuwait
Need help choosing the right model or a compatible accessory? Contact AX Store and our team will help you build the right setup.
THE DETAILS
Technical specifications
Model and capacity
Kingston
FURY Beast RGB DDR5
KF564C32BWEAK2-32
White
32 GB
2 × 16 GB modules
DDR5 SDRAM
Non-ECC, unbuffered DIMM (UDIMM)
288
Gold
2G × 64-bit; single-rank 1Rx8
Eight 2G × 8-bit FBGA components
16 Gbit
Factory timing profiles
6400 MT/s
CL32
1.4 V
4800 MT/s; CL40-39-39; 1.1 V
AMD EXPO v1.1
6400 MT/s; CL32-39-39; 1.4 V
6000 MT/s; CL30-36-36; 1.4 V
Intel XMP 3.0
6400 MT/s; CL32-39-39; 1.4 V
6000 MT/s; CL30-36-36; 1.4 V
Compatible motherboard and CPU; enable profile in BIOS. Achievable speed depends on CPU, BIOS and memory configuration.
Default electrical and timing specifications
1.1 V typical
1.1 V typical
1.8 V typical
1.8–2.0 V
40 cycles
48 ns
295 ns
32 ns
Supported; on-die error correction does not make this a system-level ECC DIMM
Lighting and physical design
Aluminum
Black
RGB light bar
Kingston FURY CTRL or supported motherboard RGB software
Kingston FURY Infrared Sync
133.35 mm length × 42.23 mm height × 7.11 mm thickness
±0.15 mm unless specified; thickness ±0.3 mm
0–85 °C
−55–100 °C
94 V-0
2 × 16 GB DDR5 RGB memory modules
COMPLETE YOUR SETUP
Pairs well with
