RODE NTH-100 32 Ohm Professional Over-Ear Headphones
RØDE NTH-100. RØDE NTH-100 over-ear headphones combine custom 40 mm dynamic drivers with a closed-back design for monitoring and detailed listening. Contoured memory-foam earcups, Alcantara cushions and a locking headband support focused recording and editing sessions.
or 4 payments of 18.375 KWD with
Pay with card & save
Overview
RØDE NTH-100

Rode NTH-100
Rode NTH-100: RØDE NTH-100 over-ear headphones combine custom 40 mm dynamic drivers with a closed-back design for monitoring and detailed listening. Contoured memory-foam earcups, Alcantara cushions and a locking headband support focused recording and editing sessions. Explore this model at AX Store in Kuwait.
Nominal impedance
Acoustic design
Driver system
Published frequency response

Detailed sound for creative work
The 32-ohm NTH-100 covers a specified frequency range of 5 Hz–35 kHz. The circumaural earcups surround the ears, with 20 dBA ambient noise attenuation helping reduce outside distractions while you monitor.
Comfort and a fit that stays put
CoolTech earcup gel helps absorb and dissipate heat, while the FitLok headband system holds your chosen adjustment. Connect the detachable locking cable to either earcup to suit your workspace. The included 2.4 m cable, 3.5 mm to 1/4-inch adapter, storage pouch and COLORS ID set complete the package.
The Driver System in This Model
The listed driver arrangement is 40 mm. The manufacturer’s stated frequency response is 5 Hz–35 kHz. Listen with familiar speech, instruments and transient-rich recordings while keeping the playback source and listening level consistent. Driver size describes the construction; the full listening result also depends on fit and your audio chain.
Choose the Listening Environment
The closed-back earcups help contain playback and reduce incoming room sound through their physical construction. Fit affects that seal, so place the earcups evenly before you start monitoring. Use a listening level that lets you follow the recording without relying on the headphones to remove every sound in the room.
Match the Source to the Actual Load
This configuration has a listed impedance of 32 Ω. Source output capability and headphone sensitivity both affect the available listening level. Choose an appropriate headphone output, start at a low setting and adjust around your recordings. A plug adapter changes the connector size; it does not add amplifier power.

Plan the Cable and Connector Path
The cable arrangement is Dual TRRS attachments; connect cable to left or right earcup. Keep enough slack for normal head movement and check the exact replacement-cable requirements if this model uses a detachable connection. Headphone-side locking connectors are model-specific.


Rode NTH-100 Setup Choices
Compare open-back or closed-back design, fit and the headphone connection. Check the intended source output and listening requirements together; the impedance number alone does not choose the complete setup. Explore iFi Audio ZEN DAC 3 DAC and Headphone Amplifier, Hi-Res Playback, JDS LABS ATOM DAC 2 USB-C DAC, Gator Frameworks Clamp Mounted Headphone Hanger for Desk.
Frequently Asked Questions
Which headphone configuration is this?
RODE NTH-100 32 Ohm Professional Over-Ear Headphones. 32 Ω is the listed impedance; choose the exact model rather than transferring specifications from another version.
Is the acoustic design suitable for my room?
The closed-back construction provides passive sound isolation and helps reduce playback spill. Place both earcups evenly to maintain the intended seal.
Do I need a headphone amplifier?
32 Ω is the impedance, but sensitivity, source capability and your desired level also matter. Use a suitable headphone output; higher-impedance models can need more voltage than a phone or controller provides.
What cable or plug is specified?
Dual TRRS attachments; connect cable to left or right earcup. Use the connection and any adapter specified for this exact model.
Does it include a voice microphone?
These are dedicated listening headphones. Add a separate microphone and the appropriate recording input if your setup needs voice chat or recording.
How should I interpret the recommended audio equipment?
The recommendations offer alternative audio chains. A standalone amplifier needs a suitable analogue source; a standalone DAC needs an amplifier. Keep the normal stereo cable with the matching headphone output.
Which accessories are listed?
NTH-100, black 2.4 m cable, 3.5 mm to 1/4-inch adapter, storage pouch and COLORS ID set. Other equipment shown in listening or studio photographs is a separate purchase.
Does the standard NTH-100 include a boom microphone?
This is the listening-headphone NTH-100 package. NTH-100M is a separate headset configuration. Check the package and microphone accessory before choosing a voice-chat setup.
Build Your Setup with AX Store
Explore computers, displays and accessories for your workspace at AX Store. For help choosing the right model or checking an accessory, contact AX Store.
Complete Your Setup
Explore equipment for your workspace: FiiO K7 Desktop DAC and Headphone Amplifier, Dual AK4493SEQ, FiiO K11 R2R Desktop DAC & Headphone Amplifier – 24-Bit R2R, Sound BlasterX G6 Hi-Res Gaming DAC & Amp, 7.1 Surround.
Explore the RODE range at AX Store.
THE DETAILS
Technical specifications
Product specifications
RØDE
NTH-100
Dynamic
40 mm
Closed-back
Circumaural / over-ear
5 Hz–35 kHz
32 Ω
110 dB
126 dB SPL
20 dBA
Dual TRRS attachments; connect cable to left or right earcup
80 × 190 × 188 mm (L × W × H)
350 g
2.4 m
Alcantara with memory foam and CoolTech gel
FitLok locking system
NTH-100, black 2.4 m cable, 3.5 mm to 1/4-inch adapter, storage pouch and COLORS ID set
Product identification
RODE
698813007912
698813007912
COMPLETE YOUR SETUP