Skip to content
Sennheiser HD 660 S 150 Ohm Open-Back Headphones
Sennheiser

Sennheiser HD 660 S 150 Ohm Open-Back Headphones

Sennheiser HD 660 S. Sennheiser HD 660 S is an open-back dynamic headphone built for detailed home listening. Its 150-ohm transducers, detachable cables and balanced 4.4 mm connection option make it a flexible match for a dedicated listening system.

SKU: 508231

Regular price 147.000 KWD

or 4 payments of 36.750 KWD with

Pay with card & save

KNET Mastercard Gateway
139.900 KWD Save 7.100 KWD

Overview

SENNHEISER HD 660 S

HD 660S

Sennheiser HD 660 S

Sennheiser HD 660 S is an open-back dynamic headphone built for detailed home listening. Its 150-ohm transducers, detachable cables and balanced 4.4 mm connection option make it a flexible match for a dedicated listening system. Explore this model at AX Store in Kuwait.

150 Ω

Nominal impedance

Open-Back

Acoustic design

9 Hz - 41,500 Hz

Published frequency response

260 g

Listed headphone weight

HD 660S

Discover the recording

The open acoustic design supports a natural sense of space and separation. It is best enjoyed in a quiet environment, as the earcups do not isolate surrounding sound.

Select your listening connection

Two 3 m cables are supplied: one with a 6.35 mm stereo plug and one with a 4.4 mm balanced plug. A flexible adapter adds 3.5 mm connectivity.

Comfort for a full album

The circumaural fit surrounds your ears, with a padded headband and replaceable cushions. The headphone weighs 260 g. Set the earcups into a comfortable position before bringing the volume to your usual listening level.

Built around the original HD 660 S

This is the original 150-ohm HD 660 S. Its detachable cable system supports straightforward replacement and connection changes. Use familiar recordings and a consistent listening level when assessing sound with your usual audio equipment.

Match the Source to the Actual Load

This configuration has a listed impedance of 150 ohms. Source output capability and headphone sensitivity both affect the available listening level. Choose an appropriate headphone output, start at a low setting and adjust around your recordings. A plug adapter changes the connector size; it does not add amplifier power.

HD 660S

Plan the Cable and Connector Path

The cable arrangement is 3 m. Keep enough slack for normal head movement and check the exact replacement-cable requirements if this model uses a detachable connection. Headphone-side locking connectors are model-specific.

Sennheiser HD 660 S Setup Choices

Compare open-back or closed-back design, fit and the headphone connection. Check the intended source output and listening requirements together; the impedance number alone does not choose the complete setup. Explore iFi Audio ZEN DAC 3 DAC and Headphone Amplifier, Hi-Res Playback, JDS LABS ATOM AMP 2 Headphone Amplifier, JDS LABS ATOM DAC 2 USB-C DAC.

Frequently Asked Questions

Which headphone configuration is this?

Sennheiser HD 660 S 150 Ohm Open-Back Headphones. 150 ohms is the listed impedance; choose the exact model rather than transferring specifications from another version.

Is the acoustic design suitable for my room?

Open-back headphones allow sound into and out of the earcups. A quiet environment helps, and nearby microphones or people may hear the playback.

Do I need a headphone amplifier?

150 ohms is the impedance, but sensitivity, source capability and your desired level also matter. Use a suitable headphone output; higher-impedance models can need more voltage than a phone or controller provides.

What cable or plug is specified?

3 m. Use the connection and any adapter specified for this exact model.

Does it include a voice microphone?

These are dedicated listening headphones. Add a separate microphone and the appropriate recording input if your setup needs voice chat or recording.

How should I interpret the recommended audio equipment?

The recommendations offer alternative audio chains. A standalone amplifier needs a suitable analogue source; a standalone DAC needs an amplifier. Keep the normal stereo cable with the matching headphone output.

Is this the 300-ohm HD660S2?

This is the original HD660 S with 150-ohm impedance. HD660S2 is a separate 300-ohm model. Use the specifications and supplied connection options for this exact version.

Build Your Setup with AX Store

Explore computers, displays and accessories for your workspace at AX Store. For help choosing the right model or checking an accessory, contact AX Store.

Compare DROP X Sennheiser HD 6XX 300 Ohm Open Back Headphones. Match the exact model, connection and configuration to your setup.

Explore the Sennheiser range at AX Store.

THE DETAILS

Technical specifications

Audio, design and connections

Model

Sennheiser HD 660 S

Acoustic design

Open-Back

Connectivity

Wired

Transducer principle

Dynamic, open

Ear coupling

Circumaural

Frequency response

9 Hz - 41,500 Hz

Impedance

150 ohms

Sound pressure level

104 dB at 1 V

Total harmonic distortion

Less than 0.04% at 1 kHz, 100 dB

Weight

260 g

Cable length

3 m

Connections supplied

6.35 mm stereo and 4.4 mm balanced

Adapter

6.35 mm to 3.5 mm

Cable design

Detachable

Colour

Black

Product identification

Brand

Sennheiser

SKU / MPN

508231

COMPLETE YOUR SETUP

Pairs well with

Added to cart

View cart

Subscribed

We'll email you as soon as it's back in stock.

Saved to wishlist

View wishlist