Beyerdynamic
AX USB Creator Bundle - PodMic USB + DT 990 PRO X + PSA1+
A three-piece USB recording setup with a black RØDE PodMic USB, beyerdynamic DT 990 PRO X 48 Ohm headphones and black PSA1+ boom arm. Monitor through the microphone's 3.5 mm output without adding an external audio interface.
BUNDLE
What's included
Overview
AX USB CREATOR AUDIO BUNDLE
AX USB Creator: a microphone, monitoring and a desk arm.
AX USB Creator combines the black RØDE PodMic USB, beyerdynamic DT 990 PRO X headphones and a black RØDE PSA1+ boom arm. Connect the microphone to a compatible computer by USB and plug the headphones into its monitoring output. The 48 Ohm, open-back headphones and adjustable arm complete a compact setup for calls, streaming and spoken-word recording.
USB-C
Microphone connection
24-bit / 48 kHz
USB recording format
48 Ohm
DT 990 PRO X impedance
3
Included components
What is included in AX USB Creator?
The AX USB Creator bundle includes 3 main products, with one of each supplied in the finishes shown below. Product accessories and the full connection guide are listed further down.
INCLUDED COMPONENT 1 · QUANTITY 1
RØDE PodMic USB dynamic microphone — Black
The PodMic USB combines a dynamic speech microphone, a USB recording interface and an analogue XLR output in one all-metal body. Its end-address cardioid capsule is designed to pick up the voice in front of the grille, with internal shock isolation and pop protection to help control handling vibration and plosives.
- Voice capture and construction: The frequency range is 20 Hz–20 kHz, maximum SPL is 148 dB SPL and XLR output impedance is 460 Ohm. The microphone weighs 900 g and uses an integrated swing mount for positioning.
- USB-C recording: The USB path records at 24-bit / 48 kHz through RØDE's Revolution Preamp. It is powered over USB and can connect directly to a compatible computer without a separate audio interface.
- Onboard APHEX processing: The USB signal can use a high-pass filter, noise gate, compressor, Aural Exciter and Big Bottom. Compatible RØDE software exposes detailed controls and VoxLab's Depth, Sparkle and Punch adjustments.
- Direct headphone monitoring: A 3.5 mm headphone socket and onboard level control provide zero-latency microphone monitoring during USB operation. Select the microphone as the computer's playback device to hear computer audio through the same headphones.
- Analogue XLR option: The 3-pin XLR output connects to a microphone input on an interface or mixer. It carries the analogue capsule signal without the microphone's USB DSP. Phantom power is not required and should be switched off for this connection.
- Mounting and supplied accessories: The integrated mount supports 3/8-inch and 5/8-inch fittings. An external pop filter supplements the internal filter, and the supplied SC29 is a 3 m USB-C to USB-C data cable.
- Platform and cable requirements: Direct USB use supports compatible Windows, macOS, iOS and Android devices. Software availability and minimum OS requirements vary by application. A USB-A-only computer or Lightning device needs the appropriate data cable or adapter, purchased separately.
In AX USB Creator, use the black PodMic USB as the audio interface: its USB connection carries your voice to the computer, and its headphone output supplies direct monitoring to the included DT 990 PRO X.
View the RØDE PodMic USB dynamic microphone — Black product details.
INCLUDED COMPONENT 2 · QUANTITY 1
beyerdynamic DT 990 PRO X 48 Ohm open-back headphones
The DT 990 PRO X provides open-back monitoring for speech editing, listening and checking computer audio. Its STELLAR.45 driver has a 48 Ohm impedance, while a detachable cable makes the headphone connection easy to service or replace.
- STELLAR.45 driver: The specified frequency response is 5–40,000 Hz. The open earcups produce an airy presentation that helps when listening for editing details and comparing different parts of a mix.
- Over-ear comfort: Soft velour cushions surround the ears, and the padded headband has a central recess to reduce pressure at the top of the head. The headphones weigh 292 g without the cable.
- Detachable 3 m cable: A locking mini-XLR connector attaches the cable to the headphone. At the equipment end, a 3.5 mm stereo plug and supplied 6.35 mm adapter support common headphone sockets.
- Serviceable construction: Made in Germany with replaceable wear components, including ear pads and headband padding, for ongoing studio and desk use.
- Open-back recording considerations: Sound can escape the earcups and external noise can enter. Keep monitoring at a suitable level near the microphone and use a quiet space. These headphones have no built-in microphone.
- Exact version: This bundle contains the DT 990 PRO X 48 Ohm, rather than the fixed-cable DT 990 PRO 250 Ohm. The driver, impedance and cable design are different.
Connect the DT 990 PRO X's 3.5 mm plug directly to the PodMic USB headphone socket. The 6.35 mm adapter is not needed here. This gives you microphone monitoring and computer playback when the PodMic USB is selected as the computer's output device.
View the beyerdynamic DT 990 PRO X 48 Ohm open-back headphones product details.
INCLUDED COMPONENT 3 · QUANTITY 1
RØDE PSA1+ microphone boom arm — Black
The PSA1+ suspends the microphone above the desk and lets you move it closer for recording or swing it away when finished. Its parallelogram mechanism keeps the microphone's orientation consistent as the arm moves, while damped springs and neoprene covers help reduce noise from adjustment.
- Supported microphone load: The arm accommodates a combined microphone and mount load from 94 g to 1.2 kg. Include any additional mount or accessory in that total when changing the setup.
- Positioning range: It provides up to 940 mm horizontal reach, 860 mm vertical reach and 360-degree rotation, giving room to place the microphone beside a monitor or keyboard.
- Two mounting methods: A desk clamp and threaded desk insert are supplied. The clamp supports compatible desk surfaces up to 70 mm thick; the insert supports up to 55 mm and requires an appropriate mounting hole.
- Integrated cable management: Cable guides route USB or XLR leads along the arm. Leave a small service loop at the microphone and moving joints so adjustment does not pull on the connectors.
- Microphone fitting and construction: A supplied thread adapter supports common microphone mounting threads. The arm weighs approximately 1.52 kg; use a stable, suitable desk surface and tighten the mounting hardware before positioning the microphone.
The black PSA1+ positions the black PodMic USB beside your screen and supports its 900 g microphone body within the arm's combined-load limit. Route the SC29 USB cable through the arm's guides and keep slack for movement.
View the RØDE PSA1+ microphone boom arm — Black product details.
Set up USB recording and direct monitoring
- Install the PSA1+ using the supplied clamp or threaded insert, then attach the PodMic USB using the appropriate thread fitting. Fit the included external pop filter and position the end of the grille toward your mouth.
- Connect the supplied SC29 USB-C cable between the microphone and a compatible USB-C computer. A USB-A-only computer requires a compatible data cable or adapter, sold separately.
- Connect the DT 990 PRO X's cable to the headphones, then plug its 3.5 mm end into the PodMic USB. Select PodMic USB as both the recording input and playback output in the operating system and recording application.
- Adjust the microphone's gain and headphone level. Use compatible RØDE software to configure USB processing. If the recording application also returns the live microphone signal, disable that software monitoring path to avoid hearing a delayed duplicate.
The complete included recording path works over USB, without a separate mixer. The microphone also supports analogue XLR use with a future interface, but this bundle does not include an XLR cable or mixer. The PodMic USB's digital processing does not carry across to its XLR output.
In the box
- 1 × RØDE PodMic USB in black, external pop filter, rubber XLR cover and SC29 3 m USB-C to USB-C cable.
- 1 × beyerdynamic DT 990 PRO X 48 Ohm headphones, detachable 3 m cable and 6.35 mm adapter.
- 1 × RØDE PSA1+ in black, with desk clamp, threaded desk insert and thread adapter.
Complete Your Audio Setup
Browse more audio bundles and RØDE products. Optional additions for your desk include Elgato Facecam MK.2 1080p Premium Webcam, Elgato Stream Deck MK.2, 15-Key Customizable Controller, Razer Key Light Chroma - All-In-One Lighting Kit, Logitech MX Brio 4K Webcam - 4K30 / 1080p60. These products are sold separately.
Frequently Asked Questions
Does AX USB Creator need a separate mixer?
No. For this setup, connect the PodMic USB to the computer by USB and the headphones to the microphone's 3.5 mm output. A separate mixer is not included or required for that connection.
Does it work with Windows and Mac?
The PodMic USB supports compatible Windows and macOS computers. Its datasheet lists Windows 10 and macOS 10.15 minimum requirements; current RØDE desktop software may require a newer operating system.
Where do the headphones connect?
Connect the DT 990 PRO X's 3.5 mm plug to the PodMic USB headphone output. Select the PodMic USB as your computer's audio input and output, then adjust the microphone's headphone level.
Is a USB cable included?
The PodMic USB includes the SC29 3 m USB-C to USB-C cable. Computers with only USB-A ports require a compatible USB-A to USB-C data cable or adapter, sold separately.
Is this bundle all black?
The PodMic USB and PSA1+ are fixed to their black variants. The DT 990 PRO X is supplied in its standard black finish with velour ear pads.
Do the DT 990 PRO X headphones block outside sound?
They are open-back headphones. They allow sound to pass through the earcups and suit a quieter recording or listening space; they do not provide the isolation of a closed-back design.
Can I use the PodMic USB with an XLR interface later?
Yes. Its XLR output can connect to a compatible microphone input using a separately purchased XLR cable. The microphone's USB processing and USB headphone-monitoring path are separate from that analogue connection.
Build Your Setup with AX Store Kuwait
Need help choosing the right model or a compatible accessory? Contact AX Store and our team will help you build the right setup.
THE DETAILS
Technical specifications
Bundle contents
1 included
1 included
1 included
Black PodMic USB and black PSA1+; standard black DT 990 PRO X.
RØDE PodMic USB — General
RØDE
PodMic USB
Black (included in this bundle)
Sydney, Australia
RØDE PodMic USB — Acoustic and Electrical Specifications
Dynamic
High-power neodymium
Cardioid
End-address
20 Hz–20 kHz
460 Ω (XLR)
148 dB SPL
Analogue: 26 dBA; digital: 19 dBA
−57 dB re 1 V/Pa (1.4 mV at 94 dB SPL), ±3 dB
3-pin XLR output; 3.5 mm headphone output
RØDE PodMic USB — Digital Specifications
USB-C
5 V, 100 mA
24-bit
48 kHz
RØDE Revolution Preamp
APHEX processing: high-pass filter, noise gate, compressor, Aural Exciter and Big Bottom
VoxLab: Depth, Sparkle and Punch
Zero-latency monitoring over USB, with onboard level control
Onboard processing applies to the USB digital output; XLR carries the analogue microphone signal
Not required; RØDE instructs users to turn phantom power off when using the XLR output
RØDE PodMic USB — Mechanical Specifications
All-metal body
900 g
172 x 107 x 62 mm
Integrated swing mount
3/8-inch and 5/8-inch
Internal pop filter plus included external pop filter
Internal shock mount
RØDE PodMic USB — Software and Compatibility
Windows, macOS, iOS and Android; a compatible USB data cable or adapter is required
Windows 10; macOS 10.15
Windows 10 version 1803 or later; macOS 11 or later
RØDE Central, RØDE Connect, UNIFY, RØDE Reporter, RØDE Central Mobile and RØDE Capture; software availability depends on platform
A compatible USB-A to USB-C data cable is required, sold separately
A compatible MFi-certified cable, such as RØDE SC15, SC19 or SC21, is required, sold separately
Connect to a compatible microphone preamp, audio interface or mixer using an XLR cable, sold separately
RØDE PodMic USB — In the Box
1 x PodMic USB
1 x External pop filter
1 x SC29, 3 m USB-C to USB-C cable
Rubber XLR cover
beyerdynamic DT 990 PRO X 48 Ohm — Audio and construction
beyerdynamic
DT 990 PRO X
Open-back
Over-ear
Wired
STELLAR.45
48 ohms
5–40,000 Hz
Detachable 3 m cable with locking mini-XLR
No built-in microphone
292 g
3.5 mm stereo with 6.35 mm adapter
RØDE PSA1+ — Mechanical Specifications
1.52
Collapsed Width: 65 Length: 500 Depth: 180 Fully Extended Width: 65 Length: 940 Depth: 100
Up to 70mm (using Desk Clamp) Up to 55mm (using Desk Insert)
RØDE PSA1+ — Support and Mounts
94 g to 1.2 kg
Desk clamp and threaded desk insert
360°
Integrated
COMPLETE YOUR SETUP
Pairs well with
