RODE
AX White Creator Bundle - PodMic USB + GoXLR Mini + PSA1+ + XLR Cable
A white PodMic USB, GoXLR Mini and PSA1+ boom arm, plus one green RØDE XLR3M cable. All finishes are fixed. Connect the microphone to the mixer over XLR for a Windows PC streaming setup.
BUNDLE
What's included
Overview
AX WHITE CREATOR BUNDLE - PODMIC USB + GOXLR MINI + PSA1+ + XLR CABLE
AX White Creator: white microphone, mixer and boom arm.
AX White Creator brings together a white RØDE PodMic USB, white TC-Helicon GoXLR Mini and white RØDE PSA1+ boom arm, plus one green RØDE XLR3M cable. The microphone connects to the mixer over XLR, while the GoXLR Mini connects to your Windows PC. All finishes are fixed. Headphones and a computer are not included.
White
Microphone, mixer and arm
4
GoXLR Mini channel faders
XLR + USB-C
PodMic USB connection options
3 m
Included XLR cable length
What is included in AX White Creator?
The AX White Creator bundle includes 4 main products, with one of each supplied in the finishes shown below. Product accessories and the full connection guide are listed further down.
INCLUDED COMPONENT 1 · QUANTITY 1
RØDE PodMic USB dynamic microphone — White
The PodMic USB combines a dynamic speech microphone, a USB recording interface and an analogue XLR output in one all-metal body. Its end-address cardioid capsule is designed to pick up the voice in front of the grille, with internal shock isolation and pop protection to help control handling vibration and plosives.
- Voice capture and construction: The frequency range is 20 Hz–20 kHz, maximum SPL is 148 dB SPL and XLR output impedance is 460 Ohm. The microphone weighs 900 g and uses an integrated swing mount for positioning.
- USB-C recording: The USB path records at 24-bit / 48 kHz through RØDE's Revolution Preamp. It is powered over USB and can connect directly to a compatible computer without a separate audio interface.
- Onboard APHEX processing: The USB signal can use a high-pass filter, noise gate, compressor, Aural Exciter and Big Bottom. Compatible RØDE software exposes detailed controls and VoxLab's Depth, Sparkle and Punch adjustments.
- Direct headphone monitoring: A 3.5 mm headphone socket and onboard level control provide zero-latency microphone monitoring during USB operation. Select the microphone as the computer's playback device to hear computer audio through the same headphones.
- Analogue XLR option: The 3-pin XLR output connects to a microphone input on an interface or mixer. It carries the analogue capsule signal without the microphone's USB DSP. Phantom power is not required and should be switched off for this connection.
- Mounting and supplied accessories: The integrated mount supports 3/8-inch and 5/8-inch fittings. An external pop filter supplements the internal filter, and the supplied SC29 is a 3 m USB-C to USB-C data cable.
- Platform and cable requirements: Direct USB use supports compatible Windows, macOS, iOS and Android devices. Software availability and minimum OS requirements vary by application. A USB-A-only computer or Lightning device needs the appropriate data cable or adapter, purchased separately.
In AX White Creator, the white PodMic USB connects to the white GoXLR Mini through its analogue XLR output using the green cable. The mixer handles gain and processing for that path. Direct USB recording remains a separate option when using the microphone without the mixer.
View the RØDE PodMic USB dynamic microphone — White product details.
INCLUDED COMPONENT 2 · QUANTITY 1
TC-Helicon GoXLR Mini USB broadcast mixer — White
The GoXLR Mini is the control centre for microphone and computer audio in a Windows streaming setup. Its Midas microphone preamp, four physical faders and configurable routing let you set a balance between your voice, game, chat and other supported audio sources.
- Hands-on mixing controls: Four faders, channel mute controls, a cough button and a bleep function keep frequently used actions within reach. The GoXLR app configures channel assignments, routing, mute behaviour and RGB lighting.
- Microphone processing: The Mini provides EQ, compression and gating with 24-bit / 48 kHz conversion. Set microphone gain first, then adjust processing for the voice and room.
- Analogue inputs and outputs: A balanced XLR microphone input is accompanied by 3.5 mm microphone, stereo line-in, line-out and headphone connections. Inserting a plug into the 3.5 mm microphone input disables the XLR input.
- Digital sources and USB power: The rear panel includes a Toslink optical input and USB 2.0 Type-B connection. USB supplies 5 V / 0.5 A power and the computer audio connection; a USB cable is included.
- Phantom-power setting: The Mini provides switchable +24 V phantom power through its app. The dynamic microphone supplied in this bundle does not need it; select the dynamic microphone setting and leave phantom power off.
- Official software workflow: The complete setup uses the GoXLR app on a supported Windows PC. The Mini does not include the full-size GoXLR's sampler or voice-effects section, and official macOS app support should not be assumed.
- Desktop footprint: The unit measures 70 × 132 × 168 mm and weighs approximately 0.68 kg, leaving space for the keyboard and microphone arm.
The white GoXLR Mini combines the PodMic's XLR signal with supported computer audio on a Windows PC. Connect a separate pair of headphones to its 3.5 mm headphone output for monitoring; headphones are not included in this four-component bundle.
View the TC-Helicon GoXLR Mini USB broadcast mixer — White product details.
INCLUDED COMPONENT 3 · QUANTITY 1
RØDE PSA1+ microphone boom arm — White
The PSA1+ suspends the microphone above the desk and lets you move it closer for recording or swing it away when finished. Its parallelogram mechanism keeps the microphone's orientation consistent as the arm moves, while damped springs and neoprene covers help reduce noise from adjustment.
- Supported microphone load: The arm accommodates a combined microphone and mount load from 94 g to 1.2 kg. Include any additional mount or accessory in that total when changing the setup.
- Positioning range: It provides up to 940 mm horizontal reach, 860 mm vertical reach and 360-degree rotation, giving room to place the microphone beside a monitor or keyboard.
- Two mounting methods: A desk clamp and threaded desk insert are supplied. The clamp supports compatible desk surfaces up to 70 mm thick; the insert supports up to 55 mm and requires an appropriate mounting hole.
- Integrated cable management: Cable guides route USB or XLR leads along the arm. Leave a small service loop at the microphone and moving joints so adjustment does not pull on the connectors.
- Microphone fitting and construction: A supplied thread adapter supports common microphone mounting threads. The arm weighs approximately 1.52 kg; use a stable, suitable desk surface and tighten the mounting hardware before positioning the microphone.
The white PSA1+ supports the 900 g white PodMic USB and gives the setup an adjustable speaking position. Route the included green XLR cable along the arm and keep additional accessories within the combined load rating.
View the RØDE PSA1+ microphone boom arm — White product details.
INCLUDED COMPONENT 4 · QUANTITY 1
RØDE XLR3M 3 m premium XLR cable — Green
The XLR3M completes the analogue microphone connection in this bundle. Its 3 m length provides a route from the microphone, along the arm and down to the mixer without adding another cable purchase for that signal path.
- Balanced 3-pin connection: Female XLR connects to the microphone's output, and male XLR connects to the mixer's microphone input. The cable carries the analogue microphone signal between those devices.
- Cable and connectors: RØDE specifies Canare cable with Neutrik connectors and strain relief for repeated studio use. The connectors lock into compatible XLR sockets for a secure connection.
- Routing on the arm: Use the PSA1+ cable guides and leave slack at moving joints and the microphone connector. The cable is 3 m long and one cable is included.
- Exact function: This is an XLR-to-XLR microphone cable. It is not a USB converter, audio interface or headphone cable; the included mixer handles the computer connection.
The included cable is fixed to green. Connect its female end to the white PodMic USB's XLR output and its male end to the white GoXLR Mini's microphone input. The microphone, mixer and arm are white; the one included XLR cable is green.
View the RØDE XLR3M 3 m premium XLR cable — Green product details.
Connect the white mixer setup over XLR
- Fit the white PSA1+ to a suitable desk and attach the white PodMic USB. Connect the green XLR3M from the microphone to the GoXLR Mini's XLR input.
- Connect the GoXLR Mini to a supported Windows PC by USB. In the GoXLR app, select the dynamic microphone setting, leave phantom power off and set microphone gain.
- Connect your own headphones to the GoXLR Mini's 3.5 mm headphone output. Do not plug a second microphone into its 3.5 mm microphone socket when using the XLR input, because that socket takes priority.
- Assign PC audio sources to the faders and set the broadcast mix in your streaming or recording application. For this XLR path, use the Mini's EQ, compression and gate; the PodMic USB's APHEX DSP does not pass through XLR.
This complete mixer bundle is intended for Windows. The PodMic USB can also be used on its own through USB with a compatible Mac or other supported device, but that is a separate workflow. A computer and headphones are not included.
PodMic USB connections for a separate direct-USB workflow
The white PodMic USB has both an analogue XLR output and a USB-C recording connection. The main AX White Creator signal path uses XLR into the GoXLR Mini; the microphone's USB-C port is not the connection to the mixer.
For standalone USB microphone use, connect the supplied SC29 directly to a compatible computer and monitor through the microphone's own 3.5 mm headphone socket. In that workflow, the microphone's onboard APHEX processing and direct monitoring are available. Choose the intended input and output devices in the recording application to avoid duplicate audio paths.
In the box
- 1 × RØDE PodMic USB in white with external pop filter, rubber XLR cover and SC29 3 m USB-C to USB-C cable.
- 1 × TC-Helicon GoXLR Mini in white with its USB cable.
- 1 × RØDE PSA1+ in white with desk clamp, threaded desk insert and thread adapter.
- 1 × RØDE XLR3M 3 m cable in green.
Headphones and a computer are not included. The fixed microphone, mixer and arm finish is white; the included cable is green.
Complete Your Audio Setup
Browse more audio bundles and RØDE products. Optional additions for your desk include beyerdynamic DT 990 PRO X Open-Back Studio Headphones 48 Ohm, Elgato Facecam MK.2 1080p Premium Webcam, Elgato Stream Deck Neo - White Version, Razer Key Light Chroma - All-In-One Lighting Kit. These products are sold separately.
Frequently Asked Questions
What is included in AX White Creator?
One white PodMic USB, one white GoXLR Mini, one white PSA1+ and one green RØDE XLR3M cable. These are fixed finishes. Headphones and a computer are not included.
Do I connect the PodMic USB to the mixer by USB or XLR?
Use the included XLR cable to connect the microphone's analogue output to the GoXLR Mini. Connect the mixer to the Windows PC over USB. Direct USB recording from the PodMic is a separate connection option.
Does the microphone's APHEX processing pass through XLR?
The PodMic USB's onboard digital processing applies to its USB output. When connected through XLR, use the GoXLR Mini's gain and processing controls for that microphone signal.
Which XLR cable colour is included?
One green RØDE XLR3M cable is included. The microphone, GoXLR Mini and PSA1+ arm are all white.
Can I use the complete bundle on a Mac?
The GoXLR Mini's official workflow uses Windows and the GoXLR app. The PodMic USB can be used separately over USB with a compatible Mac, but that is a different setup from the complete mixer bundle.
Does the PSA1+ fit my desk and microphone?
The arm supports a combined load of 94 g to 1.2 kg; the PodMic USB weighs 900 g before added accessories. The supplied clamp fits desk thicknesses up to 70 mm, and the threaded insert supports up to 55 mm.
Are headphones included, and where should they connect?
Headphones are sold separately for this bundle. For the GoXLR Mini workflow, connect them to the mixer's 3.5 mm headphone output. The PodMic USB's own headphone socket is used for its separate direct-USB monitoring workflow.
Build Your Setup with AX Store Kuwait
Need help choosing the right model or a compatible accessory? Contact AX Store and our team will help you build the right setup.
THE DETAILS
Technical specifications
Specifications are grouped by the included component.
Bundle configuration
AX White Creator Bundle - PodMic USB + GoXLR Mini + PSA1+ + XLR Cable
1 x RØDE PodMic USB - White
1 x TC-Helicon GoXLR Mini - White
1 x RØDE PSA1+ - White
1 x RØDE XLR3M cable - Green
No
PodMic USB XLR output to GoXLR Mini XLR input; GoXLR Mini USB connection to a supported Windows PC
1 x RØDE PodMic USB in white with its external pop filter and SC29 USB-C cable; 1 x TC-Helicon GoXLR Mini in white with USB cable; 1 x RØDE PSA1+ in white with desk clamp and threaded desk insert; 1 x RØDE XLR3M 3 m cable in green.
White microphone, white mixer and white boom arm
Green — fixed colour
RØDE PodMic USB - White — General
RØDE
PodMic USB
Sydney, Australia
RØDE PodMic USB - White — Acoustic and Electrical Specifications
Dynamic
High-power neodymium
Cardioid
End-address
20 Hz–20 kHz
460 Ω (XLR)
148 dB SPL
Analogue: 26 dBA; digital: 19 dBA
−57 dB re 1 V/Pa (1.4 mV at 94 dB SPL), ±3 dB
3-pin XLR output; 3.5 mm headphone output
RØDE PodMic USB - White — Digital Specifications
USB-C
5 V, 100 mA
24-bit
48 kHz
RØDE Revolution Preamp
APHEX processing: high-pass filter, noise gate, compressor, Aural Exciter and Big Bottom
VoxLab: Depth, Sparkle and Punch
Zero-latency monitoring over USB, with onboard level control
Onboard processing applies to the USB digital output; XLR carries the analogue microphone signal
Not required; RØDE instructs users to turn phantom power off when using the XLR output
RØDE PodMic USB - White — Mechanical Specifications
All-metal body
900 g
172 x 107 x 62 mm
Integrated swing mount
3/8-inch and 5/8-inch
Internal pop filter plus included external pop filter
Internal shock mount
RØDE PodMic USB - White — Software and Compatibility
Windows, macOS, iOS and Android; a compatible USB data cable or adapter is required
Windows 10; macOS 10.15
RØDE Central, RØDE Connect, UNIFY, RØDE Reporter, RØDE Central Mobile and RØDE Capture; software availability depends on platform
TC-Helicon GoXLR Mini - White — Analog Connections
1 × balanced XLR OR 1 × unbalanced 3.5 mm TS
3.5 mm microphone connection disables the XLR input
+24 V; switchable through the control app
1 × 3.5 mm TRS stereo
1 × 3.5 mm TRS stereo; broadcast stream mix copy
1 × 3.5 mm TRS stereo
TC-Helicon GoXLR Mini - White — Digital Connections and Controls
USB 2.0 Type-B
Toslink
4
6
RGB
GoXLR app required
Windows 7, 8, 10, 11 — current manufacturer page
TC-Helicon GoXLR Mini - White — Audio Processing
24-bit / 48 kHz
EQ; compression; gating
10 Hz–20 kHz, +0/−2 dB
>110 dB
>101 dB
TC-Helicon GoXLR Mini - White — Power and Physical Specifications
USB, 5 V DC / 0.5 A
2.5 W
70 × 132 × 168 mm
0.68 kg
Included
RØDE PSA1+ - White — Mechanical Specifications
1.52
Collapsed Width: 65 Length: 500 Depth: 180 Fully Extended Width: 65 Length: 940 Depth: 100
Up to 70mm (using Desk Clamp) Up to 55mm (using Desk Insert)
RØDE PSA1+ - White — Support and Mounts
94 g to 1.2 kg
Desk clamp and threaded desk insert
360°
Integrated
RØDE XLR3M cable - Green — Product Specifications
RØDE XLR-3 Premium XLR Cable 3 m
RØDE XLR-3
3 m / 3000 mm
XLR to XLR
Professional-grade Canare
Neutrik
Connector strain-relief sleeves
1 cable in green
COMPLETE YOUR SETUP
Pairs well with
