Hollyland LARK A1 Combo 2-Person Wireless Microphone Kit, USB-C & Lightning

HOLLYLAND LARK A1 COMBO

Two voices. Two phone connectors. One compact kit.

Record interviews, mobile videos, live streams and podcasts with two lightweight wireless microphones. The Hollyland LARK A1 Combo includes both USB-C and Lightning plug-in receivers, letting you choose the connection that matches your compatible phone. Each colour option includes two transmitters, a charging case and practical accessories for recording on the move.

Capture speech with room to move

The two built-in omnidirectional microphones capture each speaker without a handheld microphone or a cable running back to the phone. Digital transmission uses 2.4 GHz adaptive frequency hopping with GFSK2 Mbps modulation and is rated for 200 m line-of-sight operation. Walls, people, competing wireless devices and the way the transmitter is worn can reduce practical range. The 8.8 mm-thick transmitters weigh approximately 8 g each; magnetic attachments keep the setup small and discreet.

Audio is captured at 48 kHz/24-bit with a 20 Hz–20 kHz frequency response and 120 dB SPL maximum. Automatic limit protection helps manage sudden level changes. Sensible microphone placement and a checked recording level still matter; the system does not promise that any sound at any level is distortion-free.

Shape the sound before the take

Choose Low, Medium or High intelligent noise cancellation for the surroundings. The manual specifies 10 dB, 15 dB and 20 dB respectively, with High selected by default. Supplied furry windshields provide physical wind protection when filming outside.

The companion app offers six output-gain levels, with Level 5 as the factory setting and Level 6 as maximum. Select Mono for a combined output or Stereo when your recording app and editing workflow need separate left/right handling. Three EQ choices—Balance/Equalization, Low/Deep and Bright—change the voice tone. Small/Light, Medium and Large reverb options add space; reverb starts Off.

USB-C and Lightning are both included

Plug the matching receiver directly into your compatible phone or tablet and connect the transmitters. The receiver is powered by the mobile device. Its side USB-C port supports charging the phone during use on compatible models, and supported playback can be heard without unplugging the receiver. The Combo includes two mobile receiver types; it does not include a 3.5 mm camera-mount receiver.

Useful control from the transmitter

Single-click a transmitter button to toggle noise cancellation, double-click to mute that microphone, or triple-click to start/stop recording in a compatible mobile workflow. Hold for 3 seconds for power, or 6 seconds from the powered-off state for manual pairing. On the receiver, a 3 second hold enters pairing; single-click toggles noise cancellation, double-click mutes TX 1 and triple-click mutes TX 2.

The app can identify the microphones with distinct indicator colours, switch transmitter LEDs off for discreet filming and set an automatic shutdown time when devices are unpaired. The charging case supports automatic power behaviour when the units are removed or returned. Recording-button control operates the connected phone/app: the LARK A1 has no onboard backup recorder.

Battery figures that match the workflow

Each transmitter runs for up to 9 hours with noise cancellation off, or up to 6.5 hours with it on. The charging case provides roughly two additional complete recharge cycles. Hollyland’s up-to 54 hour figure is cumulative use with the two transmitters alternated and recharged; it is not 54 hours from one microphone or 54 hours of uninterrupted two-person recording.

The transmitter battery is 65 mAh at 3.8 V and the case battery is 460 mAh at 3.7 V. Both transmitter and case charging take under 1.5 hours under the manufacturer’s conditions. The supplied USB-A to USB-C cable charges the case. Use the system between−10°C and 60°C, and charge between0°C and 45°C.

HollyAudio app, setup and compatibility

Hollyland’s current download page provides the HollyAudio companion app; the original LARK A1 manual calls it LarkSound. With the receiver connected to the phone and the transmitters paired, use the app for gain, noise cancellation, channel mode, EQ, reverb, LED control and firmware updates. The current linked Apple listing requires iOS 13/iPadOS 13 or later; the original manual gives Android 8 or later as its baseline. Check the current app store and Hollyland device list for your model.

Keep the receiver connected during firmware installation and allow the device to restart when the update completes. Before an important take, confirm that the recording app is using the external microphone and listen back to a test recording. Matching the connector alone does not guarantee every app or charging combination.

Phone-specific note: Hollyland identifies a simultaneous-charging issue with Google Pixel 9 Pro XL and Pixel 10 Pro XL: the phone may revert to its built-in microphone. On those models, record with the receiver connected without charging the phone through it.

Official app downloads · Compatibility and support · Official user manual

Choose your colour

Space Gray

Two transmitters, USB-C receiver, Lightning receiver and matching charging case. The connection set and core features are the same across all four colours.

Ivory White

Two transmitters, USB-C receiver, Lightning receiver and matching charging case. The connection set and core features are the same across all four colours.

Mint Green

Two transmitters, USB-C receiver, Lightning receiver and matching charging case. The connection set and core features are the same across all four colours.

Sky Blue

Two transmitters, USB-C receiver, Lightning receiver and matching charging case. The connection set and core features are the same across all four colours.

Everything included for the mobile setup

Your selected-colour Combo contains 2 transmitters, 1 USB-C receiver, 1 Lightning receiver, 1 charging case, 2 magnetic attachments, 2 furry windshields, 1 carrying bag and 1 USB-A to USB-C cable. The quick guide, packing-list card, warranty card and compliance-information card are also included. A phone or tablet is required for recording and is sold separately.

Technical specifications