RØDE Wireless Micro Camera Kit 2-Person Wireless Microphone System – Black

RØDE WIRELESS MICRO CAMERA KIT

Take two-person audio from camera to phone.

The RØDE Wireless Micro Camera Kit brings two compact wearable microphones together with interchangeable camera and USB-C smartphone receivers. Use the camera receiver’s display to check the recording setup, or plug the small phone receiver directly into a compatible USB-C device. The black charging kit includes both recording routes, clothing mounts and outdoor wind protection.

Clip on the microphones and concentrate on the conversation

Each transmitter combines a built-in omnidirectional microphone with a clothing clip and a removable magnetic attachment. Mount it near the speaker’s mouth, keeping clothing and hair clear of the microphone opening. Factory pairing helps the transmitters connect when removed from the case.

GainAssist automatically manages changing speech levels. The acoustic chamber limits wind and plosive disturbance, while the included furry windshields add protection outdoors. The transmitters have a splash-resistant design and weigh 12.3 g each without the magnet, or 17.8 g with it.

See the camera recording setup at a glance

Mount the camera receiver on a suitable camera shoe and connect its 3.5 mm TRS output to a compatible microphone input using the supplied patch cable. USB-C digital output is also available when the recording device accepts USB audio. The shoe provides physical mounting; the cable carries the audio.

The camera receiver’s 1.1-inch AMOLED screen shows transmitter signal strength, input levels and battery information. Its menu provides Merged or Split output, Low/Medium/High output gain and display brightness. Press the square Home button to open or confirm a setting and use the arrow controls to navigate.

The dedicated 2.4 GHz link has a manufacturer-stated range of over 100 m. The kit also specifies plug-in-power detection for compatible cameras. Match the receiver output to the camera’s microphone input and watch the camera’s own meter as well as the receiver display.

Choose merged or separate microphone channels

Merged mode combines the active microphones into both left and right output channels, making it convenient for a ready-to-use mix or a single speaker. Split mode sends one transmitter to each channel, so the speakers can be adjusted separately during editing.

Use the receivers as alternative connection routes. One transmitter cannot send the same audio to both receivers simultaneously. You can assign one transmitter to each receiver when that split setup suits the recording, with each receiving device recording its own source.

For supported phone workflows, current companion software offers transmitter noise reduction with Off, Low and High settings. Keep that separate from the camera receiver’s definite on-device controls for output gain, routing and brightness; transmitter noise reduction is not promised as a camera-receiver adjustment.

Record directly into RØDE Capture on a compatible iOS device

Direct Connect can pair up to two transmitters to a supported Apple mobile device over Bluetooth Low Energy without a receiver. It works through RØDE Capture, the iOS video app requiring iOS 16 or later, and supports two separate 48 kHz microphone channels. Capture can also record front and rear cameras in split-screen or picture-in-picture arrangements.

Direct Connect is exclusive to Capture and is unavailable for Android, phone calls or third-party camera apps. For another app, use a compatible connected receiver. Bluetooth operation can have lower levels and a shorter practical range than the dedicated receiver link, so use the receiver for critical recording or maximum reach.

Use RØDE Central on a supported desktop or mobile device to configure and update the system. Keep transmitters charged, outside the case, powered on and paired during firmware updates.

What is included

• 2 × Wireless Micro transmitters, Black
• 1 × Wireless Micro Camera Kit receiver with AMOLED display
• 1 × USB-C smartphone receiver, Black
• 1 × Camera Kit charging case
• 1 × USB-C to USB-C cable, 30 cm
• 1 × 3.5 mm TRS-to-TRS patch cable, 20 cm
• 2 × furry windshields
• 2 × magnetic clothing attachments

Recording boundaries to plan around

Wireless Micro transmitters use their built-in microphones and have no external 3.5 mm lavalier input. They do not store on-board recordings, and this kit does not provide Wireless PRO-style 32-bit-float backup recording or timecode. Record the received audio on the connected camera, phone or computer.

The USB-C phone receiver has no dedicated real-time headphone-monitoring socket. Use a supported monitoring arrangement on the connected recording device where available. This product is the Wireless Micro Camera Kit, with a 7-hour AMOLED receiver; it is not the separate LED-only Wireless Micro Camera Receiver model.

Find the right recording route at AX Store

Browse the microphones category or the RØDE range at AX Store Kuwait for other recording setups. Refer to the official Wireless Micro user guide for pairing, firmware and Camera Kit receiver controls.