RØDE Wireless Micro USB-C 2-Person Wireless Microphone Kit

RØDE WIRELESS MICRO USB-C

Two voices. One compact smartphone kit.

Capture conversations, interviews and everyday video with RØDE Wireless Micro USB-C. Two wearable microphones send audio to a receiver that plugs directly into a compatible USB-C phone. Automatic pairing and GainAssist keep setup straightforward, while the pocket charging case carries the system between recordings. Choose the complete kit in Black or Blue.

Automatic levels, with useful recording controls

GainAssist manages levels as speech changes, reducing the need to ride microphone gain during a take. The Wireless Micro uses RØDE’s Dynamic GainAssist mode. Output gain, channel routing and LED brightness can be adjusted with the supported RØDE companion apps.

Merged mode, the default, places both microphones together on the left and right output channels. Split mode assigns one microphone to each channel so you can edit the speakers separately afterward. Split routing creates separate channels in the recording app; the transmitters do not make internal backup recordings.

Current firmware also provides independent OFF, LOW and HIGH noise-reduction settings for each transmitter. This is useful for steady background sound such as fan hum, air conditioning or distant traffic. It starts off and does not promise to remove sudden impacts or every unwanted sound.

Choose the connection that matches your app

For normal receiver-based recording, the official hardware requirements list Android 11 or later and compatible iOS devices running iOS 14 or later. Your device needs a suitable USB-C connection and an app that accepts USB audio. RØDE Central is available for supported Windows/Mac computers and iOS/Android devices for configuration and firmware updates.

The USB-C receiver also works as a class-compliant computer audio interface with stereo or dual-mono output. RØDE Connect can use the two transmitters as individual inputs for podcasting, streaming or multitrack recording. RØDE’s compatible RØDECaster/Streamer X USB-microphone inputs provide another supported digital connection route.

Update the kit through RØDE Central before relying on the latest features. Keep the charged transmitters out of the case, powered on and paired to the connected receiver during updates.

Receiver-free recording with RØDE Capture on iOS

Direct Connect pairs up to two transmitters straight to a compatible iOS device over Bluetooth Low Energy, using the RØDE Capture video app. RØDE describes two separate 48 kHz channels in this mode. Capture requires iOS 16 or later and provides access to transmitter gain and noise-reduction controls.

Direct Connect is exclusive to RØDE Capture. It is unavailable on Android or in third-party recording apps, and it is not a Bluetooth phone-call headset mode. Its levels and useful range can be lower than the dedicated receiver link, so keep the included USB-C receiver available when the recording demands it.

Check the workflow before recording

Use the built-in transmitter microphones for this system. There is no external 3.5 mm microphone input, no on-board recording or 32-bit float backup, and no timecode function. Wireless Micro is a separate wireless family from RØDE’s Series IV systems.

The included smartphone receiver has USB-C connectivity. For a camera or mixer that needs a 3.5 mm analog feed, the separate Wireless Micro Camera Receiver is required. The Camera Receiver and its cable are not included in this kit.

Explore microphones at AX Store

Compare recording options in the microphones category or browse the RØDE range at AX Store Kuwait. For pairing and firmware instructions, use the official Wireless Micro user guide.